Tunisia - Moulded Rubber Articles - Market Analysis, Forecast, Size, Trends and Insights
Get instant access to more than 2 million reports, dashboards, and datasets on the IndexBox Platform.
View PricingTunisia: Market for Rubber-to-Metal and Moulded Articles 2024
Market Size for Rubber-to-Metal and Moulded Articles in Tunisia
The Tunisian rubber-to-metal and moulded article market expanded remarkably to $X in 2023, picking up by X% against the previous year. This figure reflects the total revenues of producers and importers (excluding logistics costs, retail marketing costs, and retailers' margins, which will be included in the final consumer price). Over the period under review, consumption saw a resilient increase. Rubber-to-metal and moulded article consumption peaked at $X in 2014; however, from 2015 to 2023, consumption failed to regain momentum.
Exports of Rubber-to-Metal and Moulded Articles
Exports from Tunisia
In 2023, approx. X tons of rubber-to-metal and moulded articles were exported from Tunisia; declining by X% compared with the previous year's figure. Over the period under review, exports recorded a abrupt shrinkage. The most prominent rate of growth was recorded in 2022 with an increase of X% against the previous year. Over the period under review, the exports reached the maximum at X tons in 2012; however, from 2013 to 2023, the exports stood at a somewhat lower figure.
In value terms, rubber-to-metal and moulded article exports reduced remarkably to $X in 2023. In general, exports showed a abrupt shrinkage. The pace of growth was the most pronounced in 2018 with an increase of X% against the previous year. Over the period under review, the exports hit record highs at $X in 2012; however, from 2013 to 2023, the exports stood at a somewhat lower figure.
Exports by Country
France (X tons) was the main destination for rubber-to-metal and moulded article exports from Tunisia, with a X% share of total exports. Moreover, rubber-to-metal and moulded article exports to France exceeded the volume sent to the second major destination, Morocco (X tons), twofold. The third position in this ranking was taken by the United States (X tons), with a X% share.
From 2012 to 2023, the average annual growth rate of volume to France totaled X%. Exports to the other major destinations recorded the following average annual rates of exports growth: Morocco (X% per year) and the United States (X% per year).
In value terms, the largest markets for rubber-to-metal and moulded article exported from Tunisia were France ($X), Germany ($X) and Botswana ($X), with a combined X% share of total exports.
Botswana, with a CAGR of X%, recorded the highest growth rate of the value of exports, among the main countries of destination over the period under review, while shipments for the other leaders experienced more modest paces of growth.
Export Prices by Country
In 2023, the average rubber-to-metal and moulded article export price amounted to $X per ton, approximately mirroring the previous year. Over the period under review, the export price recorded a relatively flat trend pattern. The most prominent rate of growth was recorded in 2018 when the average export price increased by X% against the previous year. The export price peaked at $X per ton in 2019; however, from 2020 to 2023, the export prices failed to regain momentum.
There were significant differences in the average prices for the major export markets. In 2023, amid the top suppliers, the country with the highest price was Brazil ($X per ton), while the average price for exports to Italy ($X per ton) was amongst the lowest.
From 2012 to 2023, the most notable rate of growth in terms of prices was recorded for supplies to Botswana (X%), while the prices for the other major destinations experienced more modest paces of growth.
Imports of Rubber-to-Metal and Moulded Articles
Imports into Tunisia
In 2023, the amount of rubber-to-metal and moulded articles imported into Tunisia totaled X tons, remaining stable against the previous year's figure. Over the period under review, total imports indicated strong growth from 2012 to 2023: its volume increased at an average annual rate of X% over the last eleven years. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2023 figures, imports increased by X% against 2020 indices. The most prominent rate of growth was recorded in 2013 with an increase of X%. Over the period under review, imports attained the maximum at X tons in 2018; however, from 2019 to 2023, imports failed to regain momentum.
In value terms, rubber-to-metal and moulded article imports rose modestly to $X in 2023. In general, total imports indicated a buoyant increase from 2012 to 2023: its value increased at an average annual rate of X% over the last eleven-year period. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2023 figures, imports decreased by X% against 2021 indices. The most prominent rate of growth was recorded in 2013 when imports increased by X% against the previous year. Imports peaked at $X in 2014; however, from 2015 to 2023, imports stood at a somewhat lower figure.
Imports by Country
Italy (X tons), Germany (X tons) and France (X tons) were the main suppliers of rubber-to-metal and moulded article imports to Tunisia, together accounting for X% of total imports. Poland, Romania, Morocco, China, Spain, Turkey, Thailand, India, Slovakia and South Korea lagged somewhat behind, together accounting for a further X%.
From 2012 to 2023, the most notable rate of growth in terms of purchases, amongst the main suppliers, was attained by Romania (with a CAGR of X%), while imports for the other leaders experienced more modest paces of growth.
In value terms, the largest rubber-to-metal and moulded article suppliers to Tunisia were Germany ($X), Italy ($X) and France ($X), together comprising X% of total imports. Poland, Morocco, Romania, Spain, India, China, Turkey, South Korea, Thailand and Slovakia lagged somewhat behind, together accounting for a further X%.
Among the main suppliers, Romania, with a CAGR of X%, saw the highest growth rate of the value of imports, over the period under review, while purchases for the other leaders experienced more modest paces of growth.
Import Prices by Country
The average rubber-to-metal and moulded article import price stood at $X per ton in 2023, increasing by X% against the previous year. Over the period under review, the import price, however, recorded a relatively flat trend pattern. The pace of growth was the most pronounced in 2014 an increase of X% against the previous year. As a result, import price reached the peak level of $X per ton. From 2015 to 2023, the average import prices failed to regain momentum.
Prices varied noticeably by country of origin: amid the top importers, the country with the highest price was France ($X per ton), while the price for China ($X per ton) was amongst the lowest.
From 2012 to 2023, the most notable rate of growth in terms of prices was attained by Morocco (X%), while the prices for the other major suppliers experienced more modest paces of growth.
Source: IndexBox Platform
This report provides an in-depth analysis of the market for rubber-to-metal and moulded article in Tunisia. Within it, you will discover the latest data on market trends and opportunities by country, consumption, production and price developments, as well as the global trade (imports and exports). The forecast exhibits the market prospects through 2030.
Product coverage:
- Prodcom 22197345 - Rubber-to-metal bonded articles for tractors and motor vehicles
- Prodcom 2297347 -
- Prodcom 22197349 - Rubber-to-metal bonded articles for other uses than for tractors and motor vehicles
- Prodcom 22197365 - Articles of vulcanised solid rubber other than for tractors and motor vehicles
Country coverage:
- Tunisia
Data coverage:
- Market volume and value
- Per Capita consumption
- Forecast of the market dynamics in the medium term
- Trade (exports and imports) in Tunisia
- Export and import prices
- Market trends, drivers and restraints
- Key market players and their profiles
Reasons to buy this report:
- Take advantage of the latest data
- Find deeper insights into current market developments
- Discover vital success factors affecting the market
This report is designed for manufacturers, distributors, importers, and wholesalers, as well as for investors, consultants and advisors.
In this report, you can find information that helps you to make informed decisions on the following issues:
- How to diversify your business and benefit from new market opportunities
- How to load your idle production capacity
- How to boost your sales on overseas markets
- How to increase your profit margins
- How to make your supply chain more sustainable
- How to reduce your production and supply chain costs
- How to outsource production to other countries
- How to prepare your business for global expansion
While doing this research, we combine the accumulated expertise of our analysts and the capabilities of artificial intelligence. The AI-based platform, developed by our data scientists, constitutes the key working tool for business analysts, empowering them to discover deep insights and ideas from the marketing data.
-
1. INTRODUCTION
Making Data-Driven Decisions to Grow Your Business
- REPORT DESCRIPTION
- RESEARCH METHODOLOGY AND AI PLATFORM
- DATA-DRIVEN DECISIONS FOR YOUR BUSINESS
- GLOSSARY AND SPECIFIC TERMS
-
2. EXECUTIVE SUMMARY
A Quick Overview of Market Performance
- KEY FINDINGS
- MARKET TRENDS This Chapter is Available Only for the Professional Edition PRO
-
3. MARKET OVERVIEW
Understanding the Current State of The Market and Its Prospects
- MARKET SIZE
- MARKET STRUCTURE
- TRADE BALANCE
- PER CAPITA CONSUMPTION
- MARKET FORECAST TO 2030
-
4. MOST PROMISING PRODUCT
Finding New Products to Diversify Your Business
This Chapter is Available Only for the Professional Edition PRO- TOP PRODUCTS TO DIVERSIFY YOUR BUSINESS
- BEST-SELLING PRODUCTS
- MOST CONSUMED PRODUCT
- MOST TRADED PRODUCT
- MOST PROFITABLE PRODUCT FOR EXPORT
-
5. MOST PROMISING SUPPLYING COUNTRIES
Choosing the Best Countries to Establish Your Sustainable Supply Chain
This Chapter is Available Only for the Professional Edition PRO- TOP COUNTRIES TO SOURCE YOUR PRODUCT
- TOP PRODUCING COUNTRIES
- TOP EXPORTING COUNTRIES
- LOW-COST EXPORTING COUNTRIES
-
6. MOST PROMISING OVERSEAS MARKETS
Choosing the Best Countries to Boost Your Exports
This Chapter is Available Only for the Professional Edition PRO- TOP OVERSEAS MARKETS FOR EXPORTING YOUR PRODUCT
- TOP CONSUMING MARKETS
- UNSATURATED MARKETS
- TOP IMPORTING MARKETS
- MOST PROFITABLE MARKETS
7. PRODUCTION
The Latest Trends and Insights into The Industry
- PRODUCTION VOLUME AND VALUE
8. IMPORTS
The Largest Import Supplying Countries
- IMPORTS FROM 2012–2023
- IMPORTS BY COUNTRY
- IMPORT PRICES BY COUNTRY
9. EXPORTS
The Largest Destinations for Exports
- EXPORTS FROM 2012–2023
- EXPORTS BY COUNTRY
- EXPORT PRICES BY COUNTRY
-
10. PROFILES OF MAJOR PRODUCERS
The Largest Producers on The Market and Their Profiles
This Chapter is Available Only for the Professional Edition PRO -
LIST OF TABLES
- Key Findings In 2023
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Per Capita Consumption In 2012-2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country Of Origin, 2012–2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, By Country Of Destination, 2012–2023
-
LIST OF FIGURES
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Market Structure – Domestic Supply vs. Imports, In Physical Terms, 2012-2023
- Market Structure – Domestic Supply vs. Imports, In Value Terms, 2012-2023
- Trade Balance, In Physical Terms, 2012-2023
- Trade Balance, In Value Terms, 2012-2023
- Per Capita Consumption, 2012-2023
- Market Volume Forecast to 2030
- Market Value Forecast to 2030
- Products: Market Size And Growth, By Type
- Products: Average Per Capita Consumption, By Type
- Products: Exports And Growth, By Type
- Products: Export Prices And Growth, By Type
- Production Volume And Growth
- Exports And Growth
- Export Prices And Growth
- Market Size And Growth
- Per Capita Consumption
- Imports And Growth
- Import Prices
- Production, In Physical Terms, 2012–2023
- Production, In Value Terms, 2012–2023
- Imports, In Physical Terms, 2012–2023
- Imports, In Value Terms, 2012–2023
- Imports, In Physical Terms, By Country, 2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country Of Origin, 2012–2023
- Exports, In Physical Terms, 2012–2023
- Exports, In Value Terms, 2012–2023
- Exports, In Physical Terms, By Country, 2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, By Country Of Destination, 2012–2023
Recommended reports
This report provides an in-depth analysis of the market for rubber-to-metal and moulded article in Asia.
This report provides an in-depth analysis of the market for rubber-to-metal and moulded article in the U.S..
This report provides an in-depth analysis of the market for rubber-to-metal and moulded article in China.
This report provides an in-depth analysis of the market for rubber-to-metal and moulded article in the EU.
This report provides an in-depth analysis of the global market for rubber-to-metal and moulded article.
- Price for Rubber-To-Metal and Moulded Article Tunisia
- Rubber-To-Metal and Moulded Article Market
- Frozen and Fresh or Chilled Skipjack Tuna Market
- Frozen Market
- Frozen Scallops Market
- Jellyfish Market
- Non-Citrus Fruits not Elsewhere Classified Market
- Battered Fish Fillet Market
- Fluorine, Chlorine, Bromine and Iodine Market
- Crispbread Market