South-Eastern Asia - Injection or Compression Type Moulds for Rubber or Plastics - Market Analysis, Forecast, Size, Trends and Insights
Get instant access to more than 2 million reports, dashboards, and datasets on the IndexBox Platform.
View PricingSouth-Eastern Asia: Compression Type Mould Market 2024
Compression Type Mould Market Size in South-Eastern Asia
The Southeast Asian compression type mould market rose notably to $X in 2023, increasing by X% against the previous year. In general, consumption recorded a prominent expansion. The level of consumption peaked in 2023 and is expected to retain growth in the immediate term.
Compression Type Mould Production in South-Eastern Asia
In value terms, compression type mould production reduced to $X in 2023 estimated in export price. In general, production, however, showed a drastic downturn. The pace of growth appeared the most rapid in 2014 when the production volume increased by X% against the previous year. As a result, production attained the peak level of $X. From 2015 to 2023, production growth remained at a somewhat lower figure.
Compression Type Mould Exports
Exports in South-Eastern Asia
In 2023, compression type mould exports in South-Eastern Asia skyrocketed to X units, rising by X% against the previous year's figure. The total export volume increased at an average annual rate of X% over the period from 2012 to 2023; however, the trend pattern indicated some noticeable fluctuations being recorded in certain years. As a result, the exports reached the peak and are likely to continue growth in the immediate term.
In value terms, compression type mould exports rose rapidly to $X in 2023. The total export value increased at an average annual rate of X% over the period from 2012 to 2023; however, the trend pattern remained consistent, with somewhat noticeable fluctuations being observed throughout the analyzed period. The most prominent rate of growth was recorded in 2021 when exports increased by X%. As a result, the exports reached the peak of $X. From 2022 to 2023, the growth of the exports remained at a somewhat lower figure.
Exports by Country
In 2023, Thailand (X units) and Malaysia (X units) represented the major exporters of injection or compression type moulds for rubber or plastics in South-Eastern Asia, together amounting to approx. X% of total exports. Singapore (X units) took the next position in the ranking, distantly followed by Vietnam (X units) and Indonesia (X units). All these countries together took near X% share of total exports.
From 2012 to 2023, the biggest increases were recorded for Singapore (with a CAGR of X%), while shipments for the other leaders experienced more modest paces of growth.
In value terms, the largest compression type mould supplying countries in South-Eastern Asia were Thailand ($X), Singapore ($X) and Malaysia ($X), together accounting for X% of total exports. Vietnam and Indonesia lagged somewhat behind, together accounting for a further X%.
Among the main exporting countries, Vietnam, with a CAGR of X%, recorded the highest growth rate of the value of exports, over the period under review, while shipments for the other leaders experienced more modest paces of growth.
Export Prices by Country
The export price in South-Eastern Asia stood at $X per unit in 2023, waning by X% against the previous year. Overall, the export price recorded a pronounced curtailment. The pace of growth appeared the most rapid in 2013 an increase of X% against the previous year. As a result, the export price reached the peak level of $X per unit. From 2014 to 2023, the export prices failed to regain momentum.
Prices varied noticeably by country of origin: amid the top suppliers, the country with the highest price was Vietnam ($X per unit), while Malaysia ($X per unit) was amongst the lowest.
From 2012 to 2023, the most notable rate of growth in terms of prices was attained by Indonesia (X%), while the other leaders experienced mixed trends in the export price figures.
Compression Type Mould Imports
Imports in South-Eastern Asia
In 2023, purchases abroad of injection or compression type moulds for rubber or plastics decreased by X% to X units for the first time since 2019, thus ending a three-year rising trend. Overall, imports, however, recorded a strong expansion. The pace of growth appeared the most rapid in 2020 with an increase of X% against the previous year. Over the period under review, imports reached the peak figure at X units in 2022, and then dropped slightly in the following year.
In value terms, compression type mould imports shrank slightly to $X in 2023. Total imports indicated tangible growth from 2012 to 2023: its value increased at an average annual rate of X% over the last eleven years. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2023 figures, imports decreased by X% against 2021 indices. The pace of growth appeared the most rapid in 2020 when imports increased by X%. The level of import peaked at $X in 2021; however, from 2022 to 2023, imports remained at a lower figure.
Imports by Country
Vietnam was the largest importer of injection or compression type moulds for rubber or plastics in South-Eastern Asia, with the volume of imports recording X units, which was near X% of total imports in 2023. Thailand (X units) took the second position in the ranking, distantly followed by Indonesia (X units) and Malaysia (X units). All these countries together held near X% share of total imports. Cambodia (X units) held a little share of total imports.
From 2012 to 2023, the biggest increases were recorded for Cambodia (with a CAGR of X%), while purchases for the other leaders experienced more modest paces of growth.
In value terms, the largest compression type mould importing markets in South-Eastern Asia were Vietnam ($X), Thailand ($X) and Indonesia ($X), with a combined X% share of total imports. Malaysia and Cambodia lagged somewhat behind, together accounting for a further X%.
Cambodia, with a CAGR of X%, recorded the highest growth rate of the value of imports, in terms of the main importing countries over the period under review, while purchases for the other leaders experienced more modest paces of growth.
Import Prices by Country
The import price in South-Eastern Asia stood at $X per unit in 2023, declining by X% against the previous year. In general, the import price continues to indicate a abrupt contraction. The pace of growth was the most pronounced in 2019 an increase of X% against the previous year. Over the period under review, import prices attained the maximum at $X per unit in 2012; however, from 2013 to 2023, import prices stood at a somewhat lower figure.
Prices varied noticeably by country of destination: amid the top importers, the country with the highest price was Indonesia ($X per unit), while Cambodia ($X per unit) was amongst the lowest.
From 2012 to 2023, the most notable rate of growth in terms of prices was attained by Indonesia (X%), while the other leaders experienced a decline in the import price figures.
Source: IndexBox Platform
This report provides an in-depth analysis of the compression type mould market in South-Eastern Asia. Within it, you will discover the latest data on market trends and opportunities by country, consumption, production and price developments, as well as the global trade (imports and exports). The forecast exhibits the market prospects through 2030.
Product coverage:
- Prodcom 25735070 - Injection or compression type moulds for rubber or plastics
Country coverage:
- Brunei Darussalam
- Cambodia
- Indonesia
- Lao People's Democratic Republic
- Malaysia
- Myanmar
- Philippines
- Singapore
- Thailand
- Timor-Leste
- Vietnam
Data coverage:
- Market volume and value
- Per Capita consumption
- Forecast of the market dynamics in the medium term
- Production in South-Eastern Asia, split by region and country
- Trade (exports and imports) in South-Eastern Asia
- Export and import prices
- Market trends, drivers and restraints
- Key market players and their profiles
Reasons to buy this report:
- Take advantage of the latest data
- Find deeper insights into current market developments
- Discover vital success factors affecting the market
This report is designed for manufacturers, distributors, importers, and wholesalers, as well as for investors, consultants and advisors.
In this report, you can find information that helps you to make informed decisions on the following issues:
- How to diversify your business and benefit from new market opportunities
- How to load your idle production capacity
- How to boost your sales on overseas markets
- How to increase your profit margins
- How to make your supply chain more sustainable
- How to reduce your production and supply chain costs
- How to outsource production to other countries
- How to prepare your business for global expansion
While doing this research, we combine the accumulated expertise of our analysts and the capabilities of artificial intelligence. The AI-based platform, developed by our data scientists, constitutes the key working tool for business analysts, empowering them to discover deep insights and ideas from the marketing data.
-
1. INTRODUCTION
Making Data-Driven Decisions to Grow Your Business
- REPORT DESCRIPTION
- RESEARCH METHODOLOGY AND AI PLATFORM
- DATA-DRIVEN DECISIONS FOR YOUR BUSINESS
- GLOSSARY AND SPECIFIC TERMS
-
2. EXECUTIVE SUMMARY
A Quick Overview of Market Performance
- KEY FINDINGS
- MARKET TRENDS This Chapter is Available Only for the Professional Edition PRO
-
3. MARKET OVERVIEW
Understanding the Current State of The Market and Its Prospects
- MARKET SIZE
- CONSUMPTION BY COUNTRY
- MARKET FORECAST TO 2030
-
4. MOST PROMISING PRODUCT
Finding New Products to Diversify Your Business
This Chapter is Available Only for the Professional Edition PRO- TOP PRODUCTS TO DIVERSIFY YOUR BUSINESS
- BEST-SELLING PRODUCTS
- MOST CONSUMED PRODUCT
- MOST TRADED PRODUCT
- MOST PROFITABLE PRODUCT FOR EXPORT
-
5. MOST PROMISING SUPPLYING COUNTRIES
Choosing the Best Countries to Establish Your Sustainable Supply Chain
This Chapter is Available Only for the Professional Edition PRO- TOP COUNTRIES TO SOURCE YOUR PRODUCT
- TOP PRODUCING COUNTRIES
- TOP EXPORTING COUNTRIES
- LOW-COST EXPORTING COUNTRIES
-
6. MOST PROMISING OVERSEAS MARKETS
Choosing the Best Countries to Boost Your Exports
This Chapter is Available Only for the Professional Edition PRO- TOP OVERSEAS MARKETS FOR EXPORTING YOUR PRODUCT
- TOP CONSUMING MARKETS
- UNSATURATED MARKETS
- TOP IMPORTING MARKETS
- MOST PROFITABLE MARKETS
7. PRODUCTION
The Latest Trends and Insights into The Industry
- PRODUCTION VOLUME AND VALUE
- PRODUCTION BY COUNTRY
8. IMPORTS
The Largest Importers on The Market and How They Succeed
- IMPORTS FROM 2012–2023
- IMPORTS BY COUNTRY
- IMPORT PRICES BY COUNTRY
9. EXPORTS
The Largest Exporters on The Market and How They Succeed
- EXPORTS FROM 2012–2023
- EXPORTS BY COUNTRY
- EXPORT PRICES BY COUNTRY
-
10. PROFILES OF MAJOR PRODUCERS
The Largest Producers on The Market and Their Profiles
This Chapter is Available Only for the Professional Edition PRO -
11. COUNTRY PROFILES
The Largest Markets And Their Profiles
This Chapter is Available Only for the Professional Edition PRO- Brunei Darussalam
- Cambodia
- Indonesia
- Malaysia
- Myanmar
- Philippines
- Singapore
- Thailand
- Timor-Leste
- Vietnam
- Lao People's Democratic Republic
-
LIST OF TABLES
- Key Findings In 2023
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Per Capita Consumption, By Country, 2018–2023
- Production, In Physical Terms, By Country, 2012–2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country Of Destination, 2012–2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, By Country Of Origin, 2012–2023
-
LIST OF FIGURES
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Consumption, By Country, 2023
- Market Volume Forecast to 2030
- Market Value Forecast to 2030
- Products: Market Size And Growth, By Type
- Products: Average Per Capita Consumption, By Type
- Products: Exports And Growth, By Type
- Products: Export Prices And Growth, By Type
- Production Volume And Growth
- Exports And Growth
- Export Prices And Growth
- Market Size And Growth
- Per Capita Consumption
- Imports And Growth
- Import Prices
- Production, In Physical Terms, 2012–2023
- Production, In Value Terms, 2012–2023
- Production, By Country, 2023
- Production, In Physical Terms, By Country, 2012–2023
- Imports, In Physical Terms, 2012–2023
- Imports, In Value Terms, 2012–2023
- Imports, In Physical Terms, By Country, 2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country, 2012–2023
- Exports, In Physical Terms, 2012–2023
- Exports, In Value Terms, 2012–2023
- Exports, In Physical Terms, By Country, 2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, 2012–2023
Recommended reports
This report provides an in-depth analysis of the compression type mould market in Asia.
This report provides an in-depth analysis of the compression type mould market in the U.S..
This report provides an in-depth analysis of the compression type mould market in China.
This report provides an in-depth analysis of the compression type mould market in the EU.
This report provides an in-depth analysis of the global compression type mould market.