Singapore - Taps, Cocks, Valves and Similar Appliances - Market Analysis, Forecast, Size, Trends and Insights
Get instant access to more than 2 million reports, dashboards, and datasets on the IndexBox Platform.
View PricingSingapore: Tap And Valve Market 2024
Tap And Valve Market Size in Singapore
For the third consecutive year, the Singaporean tap and valve market recorded growth in sales value, which increased by X% to $X in 2022. In general, consumption showed a noticeable setback. Over the period under review, the market reached the peak level at $X in 2012; however, from 2013 to 2022, consumption failed to regain momentum.
Tap And Valve Production in Singapore
In value terms, tap and valve production fell slightly to $X in 2022 estimated in export price. Overall, production saw a abrupt decrease. The most prominent rate of growth was recorded in 2013 when the production volume increased by X%. As a result, production attained the peak level of $X. From 2014 to 2022, production growth failed to regain momentum.
Tap And Valve Exports
Exports from Singapore
In 2022, tap and valve exports from Singapore expanded remarkably to X tons, surging by X% against 2021 figures. Overall, total exports indicated a notable expansion from 2012 to 2022: its volume increased at an average annual rate of X% over the last decade. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2022 figures, exports increased by X% against 2017 indices. The pace of growth appeared the most rapid in 2014 with an increase of X% against the previous year. As a result, the exports attained the peak of X tons. From 2015 to 2022, the growth of the exports remained at a somewhat lower figure.
In value terms, tap and valve exports rose significantly to $X in 2022. Over the period under review, total exports indicated a resilient expansion from 2012 to 2022: its value increased at an average annual rate of X% over the last decade. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2022 figures, exports increased by X% against 2017 indices. The pace of growth appeared the most rapid in 2014 with an increase of X%. Over the period under review, the exports reached the peak figure in 2022 and are likely to continue growth in years to come.
Exports by Country
China (X tons), Malaysia (X tons) and Indonesia (X tons) were the main destinations of tap and valve exports from Singapore, together accounting for X% of total exports. Saudi Arabia, the United States, Thailand, the United Arab Emirates, Japan, Australia, the UK, Vietnam, Qatar and Brazil lagged somewhat behind, together comprising a further X%.
From 2012 to 2022, the biggest increases were recorded for Qatar (with a CAGR of X%), while shipments for the other leaders experienced more modest paces of growth.
In value terms, the largest markets for tap and valve exported from Singapore were China ($X), Malaysia ($X) and Indonesia ($X), with a combined X% share of total exports. The United States, Saudi Arabia, Thailand, the United Arab Emirates, Japan, Australia, Vietnam, the UK, Brazil and Qatar lagged somewhat behind, together accounting for a further X%.
Qatar, with a CAGR of X%, recorded the highest growth rate of the value of exports, among the main countries of destination over the period under review, while shipments for the other leaders experienced more modest paces of growth.
Export Prices by Country
The average tap and valve export price stood at $X per ton in 2022, with an increase of X% against the previous year. Over the period from 2012 to 2022, it increased at an average annual rate of X%. The most prominent rate of growth was recorded in 2015 when the average export price increased by X%. The export price peaked in 2022 and is expected to retain growth in the near future.
Average prices varied somewhat for the major foreign markets. In 2022, amid the top suppliers, the countries with the highest prices were Malaysia ($X per ton) and Brazil ($X per ton), while the average price for exports to the UK ($X per ton) and Qatar ($X per ton) were amongst the lowest.
From 2012 to 2022, the most notable rate of growth in terms of prices was recorded for supplies to Malaysia (X%), while the prices for the other major destinations experienced more modest paces of growth.
Tap And Valve Imports
Imports into Singapore
Tap and valve imports into Singapore expanded modestly to X tons in 2022, with an increase of X% against the previous year's figure. The total import volume increased at an average annual rate of X% over the period from 2012 to 2022; the trend pattern remained relatively stable, with somewhat noticeable fluctuations throughout the analyzed period. The growth pace was the most rapid in 2021 with an increase of X%. Imports peaked in 2022 and are expected to retain growth in the near future.
In value terms, tap and valve imports expanded remarkably to $X in 2022. Overall, total imports indicated a prominent expansion from 2012 to 2022: its value increased at an average annual rate of X% over the last decade. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2022 figures, imports increased by X% against 2017 indices. The most prominent rate of growth was recorded in 2021 when imports increased by X%. Imports peaked in 2022 and are expected to retain growth in the immediate term.
Imports by Country
In 2022, the United States (X tons) constituted the largest supplier of tap and valve to Singapore, with a X% share of total imports. Moreover, tap and valve imports from the United States exceeded the figures recorded by the second-largest supplier, China (X tons), twofold. Malaysia (X tons) ranked third in terms of total imports with an X% share.
From 2012 to 2022, the average annual growth rate of volume from the United States stood at X%. The remaining supplying countries recorded the following average annual rates of imports growth: China (X% per year) and Malaysia (X% per year).
In value terms, the United States ($X) constituted the largest supplier of taps, cocks, valves and similar appliances to Singapore, comprising X% of total imports. The second position in the ranking was held by China ($X), with an X% share of total imports. It was followed by Malaysia, with a X% share.
From 2012 to 2022, the average annual rate of growth in terms of value from the United States totaled X%. The remaining supplying countries recorded the following average annual rates of imports growth: China (X% per year) and Malaysia (X% per year).
Import Prices by Country
In 2022, the average tap and valve import price amounted to $X per ton, surging by X% against the previous year. Over the period from 2012 to 2022, it increased at an average annual rate of X%. As a result, import price reached the peak level and is likely to continue growth in the immediate term.
Average prices varied somewhat amongst the major supplying countries. In 2022, amid the top importers, the countries with the highest prices were Switzerland ($X per ton) and Indonesia ($X per ton), while the price for Taiwan (Chinese) ($X per ton) and India ($X per ton) were amongst the lowest.
From 2012 to 2022, the most notable rate of growth in terms of prices was attained by Indonesia (X%), while the prices for the other major suppliers experienced more modest paces of growth.
Source: IndexBox Platform
Frequently Asked Questions (FAQ) :
This report provides an in-depth analysis of the tap and valve market in Singapore. Within it, you will discover the latest data on market trends and opportunities by country, consumption, production and price developments, as well as the global trade (imports and exports). The forecast exhibits the market prospects through 2030.
Product coverage:
- Prodcom 28121420 - Pneumatic filters, regulators and lubricators
- Prodcom 28121450 - Valves for the control of oleohydraulic power transmission for pipes, boiler shells, tanks, vats and the like
- Prodcom 28121480 - Valves for the control of pneumatic power transmission for pipes, boiler shells, tanks, vats and the like
- Prodcom 28141120 - Pressure-reducing valves of cast iron or steel, for pipes, b oiler shells, tanks, vats and the like (excluding those combined with lubricators or filters)
- Prodcom 28141140 - Pressure-reducing valves for pipes, boiler shells, tanks, vats and the like (excluding of cast iron or steel, those combined with filters or lubricators)
- Prodcom 28141160 - Check valves for pipes, boiler shells, tanks, vats and the like
- Prodcom 28141170 - Valves for pneumatic tyres and inner-tubes
- Prodcom 28141180 - Safety or relief valves for pipes, boiler shells, tanks, vats and the like
- Prodcom 28141233 - Mixing valves for sinks, wash basins, bidets, water cisterns etc. excluding valves for pressure-reducing or oleohydraulic/pneumatic power transmissions, check valves, s afety/relief valves
- Prodcom 28141235 - Taps, cocks and valves for sinks, wash basins, bidets, water cisterns etc. excluding valves for pressurereducing/ oleohydraulic transmissions, check, safety, relief and mixing valves
- Prodcom 28141253 - Central heating radiator thermostatic valves
- Prodcom 28141255 - Central heating radiator valves, other
- Prodcom 28141313 - Other process control valves, temperature regulators
- Prodcom 28141315 - Process control valves for pipes, boiler shells, tanks etc. excluding valves for pressure-reducing or oleohydraulic/pneumatic power transmissions, check, s afety/relief valves, temp. regulators
- Prodcom 28141333 - Other gate valves, of cast iron
- Prodcom 28141335 - Other gate valves, of steel
- Prodcom 28141337 - Other gate valves, other
- Prodcom 28141353 - Globe valves, of cast iron
- Prodcom 28141355 - Globe valves, of steel
- Prodcom 28141357 - Other globe valves
- Prodcom 28141373 - Ball and plug valves
- Prodcom 28141375 - Butterfly valves
- Prodcom 28141377 - Diaphragm valves
- Prodcom 28141380 - Other appliances
Country coverage:
- Singapore
Data coverage:
- Market volume and value
- Per Capita consumption
- Forecast of the market dynamics in the medium term
- Trade (exports and imports) in Singapore
- Export and import prices
- Market trends, drivers and restraints
- Key market players and their profiles
Reasons to buy this report:
- Take advantage of the latest data
- Find deeper insights into current market developments
- Discover vital success factors affecting the market
This report is designed for manufacturers, distributors, importers, and wholesalers, as well as for investors, consultants and advisors.
In this report, you can find information that helps you to make informed decisions on the following issues:
- How to diversify your business and benefit from new market opportunities
- How to load your idle production capacity
- How to boost your sales on overseas markets
- How to increase your profit margins
- How to make your supply chain more sustainable
- How to reduce your production and supply chain costs
- How to outsource production to other countries
- How to prepare your business for global expansion
While doing this research, we combine the accumulated expertise of our analysts and the capabilities of artificial intelligence. The AI-based platform, developed by our data scientists, constitutes the key working tool for business analysts, empowering them to discover deep insights and ideas from the marketing data.
-
1. INTRODUCTION
Making Data-Driven Decisions to Grow Your Business
- REPORT DESCRIPTION
- RESEARCH METHODOLOGY AND AI PLATFORM
- DATA-DRIVEN DECISIONS FOR YOUR BUSINESS
- GLOSSARY AND SPECIFIC TERMS
-
2. EXECUTIVE SUMMARY
A Quick Overview of Market Performance
- KEY FINDINGS
- MARKET TRENDS This Chapter is Available Only for the Professional Edition PRO
-
3. MARKET OVERVIEW
Understanding the Current State of The Market and Its Prospects
- MARKET SIZE
- MARKET STRUCTURE
- TRADE BALANCE
- PER CAPITA CONSUMPTION
- MARKET FORECAST TO 2030
-
4. MOST PROMISING PRODUCT
Finding New Products to Diversify Your Business
This Chapter is Available Only for the Professional Edition PRO- TOP PRODUCTS TO DIVERSIFY YOUR BUSINESS
- BEST-SELLING PRODUCTS
- MOST CONSUMED PRODUCT
- MOST TRADED PRODUCT
- MOST PROFITABLE PRODUCT FOR EXPORT
-
5. MOST PROMISING SUPPLYING COUNTRIES
Choosing the Best Countries to Establish Your Sustainable Supply Chain
This Chapter is Available Only for the Professional Edition PRO- TOP COUNTRIES TO SOURCE YOUR PRODUCT
- TOP PRODUCING COUNTRIES
- TOP EXPORTING COUNTRIES
- LOW-COST EXPORTING COUNTRIES
-
6. MOST PROMISING OVERSEAS MARKETS
Choosing the Best Countries to Boost Your Exports
This Chapter is Available Only for the Professional Edition PRO- TOP OVERSEAS MARKETS FOR EXPORTING YOUR PRODUCT
- TOP CONSUMING MARKETS
- UNSATURATED MARKETS
- TOP IMPORTING MARKETS
- MOST PROFITABLE MARKETS
7. PRODUCTION
The Latest Trends and Insights into The Industry
- PRODUCTION VOLUME AND VALUE
8. IMPORTS
The Largest Import Supplying Countries
- IMPORTS FROM 2012–2023
- IMPORTS BY COUNTRY
- IMPORT PRICES BY COUNTRY
9. EXPORTS
The Largest Destinations for Exports
- EXPORTS FROM 2012–2023
- EXPORTS BY COUNTRY
- EXPORT PRICES BY COUNTRY
-
10. PROFILES OF MAJOR PRODUCERS
The Largest Producers on The Market and Their Profiles
This Chapter is Available Only for the Professional Edition PRO -
LIST OF TABLES
- Key Findings In 2023
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Per Capita Consumption In 2012-2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country Of Origin, 2012–2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, By Country Of Destination, 2012–2023
-
LIST OF FIGURES
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Market Structure – Domestic Supply vs. Imports, In Physical Terms, 2012-2023
- Market Structure – Domestic Supply vs. Imports, In Value Terms, 2012-2023
- Trade Balance, In Physical Terms, 2012-2023
- Trade Balance, In Value Terms, 2012-2023
- Per Capita Consumption, 2012-2023
- Market Volume Forecast to 2030
- Market Value Forecast to 2030
- Products: Market Size And Growth, By Type
- Products: Average Per Capita Consumption, By Type
- Products: Exports And Growth, By Type
- Products: Export Prices And Growth, By Type
- Production Volume And Growth
- Exports And Growth
- Export Prices And Growth
- Market Size And Growth
- Per Capita Consumption
- Imports And Growth
- Import Prices
- Production, In Physical Terms, 2012–2023
- Production, In Value Terms, 2012–2023
- Imports, In Physical Terms, 2012–2023
- Imports, In Value Terms, 2012–2023
- Imports, In Physical Terms, By Country, 2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country Of Origin, 2012–2023
- Exports, In Physical Terms, 2012–2023
- Exports, In Value Terms, 2012–2023
- Exports, In Physical Terms, By Country, 2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, By Country Of Destination, 2012–2023
Recommended reports
This report provides an in-depth analysis of the tap and valve market in Asia.
This report provides an in-depth analysis of the tap and valve market in the U.S..
This report provides an in-depth analysis of the tap and valve market in China.
This report provides an in-depth analysis of the tap and valve market in the EU.
This report provides an in-depth analysis of the global tap and valve market.