New Zealand - Taps, Cocks, Valves and Similar Appliances - Market Analysis, Forecast, Size, Trends and Insights
Get instant access to more than 2 million reports, dashboards, and datasets on the IndexBox Platform.
View PricingNew Zealand: Tap And Valve Market 2024
Tap And Valve Market Size in New Zealand
In 2023, after two years of growth, there was significant decline in the New Zealand tap and valve market, when its value decreased by X% to $X. Overall, the total consumption indicated a moderate increase from 2012 to 2023: its value increased at an average annual rate of X% over the last eleven-year period. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Tap and valve consumption peaked at $X in 2022, and then shrank notably in the following year.
Tap And Valve Exports
Exports from New Zealand
In 2023, approx. X tons of taps, cocks, valves and similar appliances were exported from New Zealand; with an increase of X% compared with the previous year. Overall, exports showed a relatively flat trend pattern. The most prominent rate of growth was recorded in 2021 with an increase of X% against the previous year. As a result, the exports attained the peak of X tons. From 2022 to 2023, the growth of the exports remained at a somewhat lower figure.
In value terms, tap and valve exports surged to $X in 2023. Over the period under review, total exports indicated a resilient increase from 2012 to 2023: its value increased at an average annual rate of X% over the last eleven years. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2023 figures, exports increased by X% against 2020 indices. The pace of growth was the most pronounced in 2021 with an increase of X% against the previous year. The exports peaked in 2023 and are likely to see gradual growth in years to come.
Exports by Country
The United States (X tons) was the main destination for tap and valve exports from New Zealand, with a X% share of total exports. Moreover, tap and valve exports to the United States exceeded the volume sent to the second major destination, Australia (X tons), threefold. India (X tons) ranked third in terms of total exports with a X% share.
From 2012 to 2023, the average annual rate of growth in terms of volume to the United States amounted to X%. Exports to the other major destinations recorded the following average annual rates of exports growth: Australia (X% per year) and India (X% per year).
In value terms, the United States ($X) remains the key foreign market for taps, cocks, valves and similar appliances exports from New Zealand, comprising X% of total exports. The second position in the ranking was held by Australia ($X), with an X% share of total exports. It was followed by India, with a X% share.
From 2012 to 2023, the average annual growth rate of value to the United States stood at X%. Exports to the other major destinations recorded the following average annual rates of exports growth: Australia (X% per year) and India (X% per year).
Export Prices by Country
The average tap and valve export price stood at $X per ton in 2023, rising by X% against the previous year. Overall, the export price recorded a pronounced expansion. The growth pace was the most rapid in 2022 an increase of X%. The export price peaked in 2023 and is likely to continue growth in years to come.
Average prices varied noticeably for the major foreign markets. In 2023, amid the top suppliers, the highest price was recorded for prices to Singapore ($X per ton) and Germany ($X per ton), while the average price for exports to India ($X per ton) and the United States ($X per ton) were amongst the lowest.
From 2012 to 2023, the most notable rate of growth in terms of prices was recorded for supplies to Fiji (X%), while the prices for the other major destinations experienced more modest paces of growth.
Tap And Valve Imports
Imports into New Zealand
In 2023, after two years of growth, there was significant decline in supplies from abroad of taps, cocks, valves and similar appliances, when their volume decreased by X% to X tons. The total import volume increased at an average annual rate of X% from 2012 to 2023; however, the trend pattern indicated some noticeable fluctuations being recorded in certain years. The most prominent rate of growth was recorded in 2017 when imports increased by X% against the previous year. Imports peaked at X tons in 2022, and then fell notably in the following year.
In value terms, tap and valve imports dropped to $X in 2023. In general, total imports indicated a notable increase from 2012 to 2023: its value increased at an average annual rate of X% over the last eleven-year period. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. The pace of growth appeared the most rapid in 2021 when imports increased by X%. Over the period under review, imports hit record highs at $X in 2022, and then reduced in the following year.
Imports by Country
China (X tons), the United States (X tons) and Australia (X tons) were the main suppliers of tap and valve imports to New Zealand, together comprising X% of total imports.
From 2012 to 2023, the biggest increases were recorded for the United States (with a CAGR of X%), while purchases for the other leaders experienced more modest paces of growth.
In value terms, the largest tap and valve suppliers to New Zealand were China ($X), the United States ($X) and Australia ($X), together comprising X% of total imports. Germany, Italy, the UK, Japan, Taiwan (Chinese), France, Israel and Denmark lagged somewhat behind, together comprising a further X%.
Israel, with a CAGR of X%, recorded the highest rates of growth with regard to the value of imports, in terms of the main suppliers over the period under review, while purchases for the other leaders experienced more modest paces of growth.
Import Prices by Country
The average tap and valve import price stood at $X per ton in 2023, rising by X% against the previous year. Over the last eleven-year period, it increased at an average annual rate of X%. The growth pace was the most rapid in 2018 when the average import price increased by X% against the previous year. Over the period under review, average import prices attained the maximum in 2023 and is expected to retain growth in the near future.
Average prices varied noticeably amongst the major supplying countries. In 2023, amid the top importers, the highest price was recorded for prices from Israel ($X per ton) and the UK ($X per ton), while the price for Australia ($X per ton) and France ($X per ton) were amongst the lowest.
From 2012 to 2023, the most notable rate of growth in terms of prices was attained by Taiwan (Chinese) (X%), while the prices for the other major suppliers experienced more modest paces of growth.
Source: IndexBox Platform
This report provides an in-depth analysis of the tap and valve market in New Zealand. Within it, you will discover the latest data on market trends and opportunities by country, consumption, production and price developments, as well as the global trade (imports and exports). The forecast exhibits the market prospects through 2030.
Product coverage:
- Prodcom 28121420 - Pneumatic filters, regulators and lubricators
- Prodcom 28121450 - Valves for the control of oleohydraulic power transmission for pipes, boiler shells, tanks, vats and the like
- Prodcom 28121480 - Valves for the control of pneumatic power transmission for pipes, boiler shells, tanks, vats and the like
- Prodcom 28141120 - Pressure-reducing valves of cast iron or steel, for pipes, b oiler shells, tanks, vats and the like (excluding those combined with lubricators or filters)
- Prodcom 28141140 - Pressure-reducing valves for pipes, boiler shells, tanks, vats and the like (excluding of cast iron or steel, those combined with filters or lubricators)
- Prodcom 28141160 - Check valves for pipes, boiler shells, tanks, vats and the like
- Prodcom 28141170 - Valves for pneumatic tyres and inner-tubes
- Prodcom 28141180 - Safety or relief valves for pipes, boiler shells, tanks, vats and the like
- Prodcom 28141233 - Mixing valves for sinks, wash basins, bidets, water cisterns etc. excluding valves for pressure-reducing or oleohydraulic/pneumatic power transmissions, check valves, s afety/relief valves
- Prodcom 28141235 - Taps, cocks and valves for sinks, wash basins, bidets, water cisterns etc. excluding valves for pressurereducing/ oleohydraulic transmissions, check, safety, relief and mixing valves
- Prodcom 28141253 - Central heating radiator thermostatic valves
- Prodcom 28141255 - Central heating radiator valves, other
- Prodcom 28141313 - Other process control valves, temperature regulators
- Prodcom 28141315 - Process control valves for pipes, boiler shells, tanks etc. excluding valves for pressure-reducing or oleohydraulic/pneumatic power transmissions, check, s afety/relief valves, temp. regulators
- Prodcom 28141333 - Other gate valves, of cast iron
- Prodcom 28141335 - Other gate valves, of steel
- Prodcom 28141337 - Other gate valves, other
- Prodcom 28141353 - Globe valves, of cast iron
- Prodcom 28141355 - Globe valves, of steel
- Prodcom 28141357 - Other globe valves
- Prodcom 28141373 - Ball and plug valves
- Prodcom 28141375 - Butterfly valves
- Prodcom 28141377 - Diaphragm valves
- Prodcom 28141380 - Other appliances
Country coverage:
- New Zealand
Data coverage:
- Market volume and value
- Per Capita consumption
- Forecast of the market dynamics in the medium term
- Trade (exports and imports) in New Zealand
- Export and import prices
- Market trends, drivers and restraints
- Key market players and their profiles
Reasons to buy this report:
- Take advantage of the latest data
- Find deeper insights into current market developments
- Discover vital success factors affecting the market
This report is designed for manufacturers, distributors, importers, and wholesalers, as well as for investors, consultants and advisors.
In this report, you can find information that helps you to make informed decisions on the following issues:
- How to diversify your business and benefit from new market opportunities
- How to load your idle production capacity
- How to boost your sales on overseas markets
- How to increase your profit margins
- How to make your supply chain more sustainable
- How to reduce your production and supply chain costs
- How to outsource production to other countries
- How to prepare your business for global expansion
While doing this research, we combine the accumulated expertise of our analysts and the capabilities of artificial intelligence. The AI-based platform, developed by our data scientists, constitutes the key working tool for business analysts, empowering them to discover deep insights and ideas from the marketing data.
-
1. INTRODUCTION
Making Data-Driven Decisions to Grow Your Business
- REPORT DESCRIPTION
- RESEARCH METHODOLOGY AND AI PLATFORM
- DATA-DRIVEN DECISIONS FOR YOUR BUSINESS
- GLOSSARY AND SPECIFIC TERMS
-
2. EXECUTIVE SUMMARY
A Quick Overview of Market Performance
- KEY FINDINGS
- MARKET TRENDS This Chapter is Available Only for the Professional Edition PRO
-
3. MARKET OVERVIEW
Understanding the Current State of The Market and Its Prospects
- MARKET SIZE
- MARKET STRUCTURE
- TRADE BALANCE
- PER CAPITA CONSUMPTION
- MARKET FORECAST TO 2030
-
4. MOST PROMISING PRODUCT
Finding New Products to Diversify Your Business
This Chapter is Available Only for the Professional Edition PRO- TOP PRODUCTS TO DIVERSIFY YOUR BUSINESS
- BEST-SELLING PRODUCTS
- MOST CONSUMED PRODUCT
- MOST TRADED PRODUCT
- MOST PROFITABLE PRODUCT FOR EXPORT
-
5. MOST PROMISING SUPPLYING COUNTRIES
Choosing the Best Countries to Establish Your Sustainable Supply Chain
This Chapter is Available Only for the Professional Edition PRO- TOP COUNTRIES TO SOURCE YOUR PRODUCT
- TOP PRODUCING COUNTRIES
- TOP EXPORTING COUNTRIES
- LOW-COST EXPORTING COUNTRIES
-
6. MOST PROMISING OVERSEAS MARKETS
Choosing the Best Countries to Boost Your Exports
This Chapter is Available Only for the Professional Edition PRO- TOP OVERSEAS MARKETS FOR EXPORTING YOUR PRODUCT
- TOP CONSUMING MARKETS
- UNSATURATED MARKETS
- TOP IMPORTING MARKETS
- MOST PROFITABLE MARKETS
7. PRODUCTION
The Latest Trends and Insights into The Industry
- PRODUCTION VOLUME AND VALUE
8. IMPORTS
The Largest Import Supplying Countries
- IMPORTS FROM 2012–2023
- IMPORTS BY COUNTRY
- IMPORT PRICES BY COUNTRY
9. EXPORTS
The Largest Destinations for Exports
- EXPORTS FROM 2012–2023
- EXPORTS BY COUNTRY
- EXPORT PRICES BY COUNTRY
-
10. PROFILES OF MAJOR PRODUCERS
The Largest Producers on The Market and Their Profiles
This Chapter is Available Only for the Professional Edition PRO -
LIST OF TABLES
- Key Findings In 2023
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Per Capita Consumption In 2012-2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country Of Origin, 2012–2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, By Country Of Destination, 2012–2023
-
LIST OF FIGURES
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Market Structure – Domestic Supply vs. Imports, In Physical Terms, 2012-2023
- Market Structure – Domestic Supply vs. Imports, In Value Terms, 2012-2023
- Trade Balance, In Physical Terms, 2012-2023
- Trade Balance, In Value Terms, 2012-2023
- Per Capita Consumption, 2012-2023
- Market Volume Forecast to 2030
- Market Value Forecast to 2030
- Products: Market Size And Growth, By Type
- Products: Average Per Capita Consumption, By Type
- Products: Exports And Growth, By Type
- Products: Export Prices And Growth, By Type
- Production Volume And Growth
- Exports And Growth
- Export Prices And Growth
- Market Size And Growth
- Per Capita Consumption
- Imports And Growth
- Import Prices
- Production, In Physical Terms, 2012–2023
- Production, In Value Terms, 2012–2023
- Imports, In Physical Terms, 2012–2023
- Imports, In Value Terms, 2012–2023
- Imports, In Physical Terms, By Country, 2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country Of Origin, 2012–2023
- Exports, In Physical Terms, 2012–2023
- Exports, In Value Terms, 2012–2023
- Exports, In Physical Terms, By Country, 2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, By Country Of Destination, 2012–2023
Recommended reports
This report provides an in-depth analysis of the tap and valve market in Asia.
This report provides an in-depth analysis of the tap and valve market in the U.S..
This report provides an in-depth analysis of the tap and valve market in China.
This report provides an in-depth analysis of the tap and valve market in the EU.
This report provides an in-depth analysis of the global tap and valve market.