Europe - Moulds for Mineral Materials - Market Analysis, Forecast, Size, Trends and Insights
Get instant access to more than 2 million reports, dashboards, and datasets on the IndexBox Platform.
View PricingEurope: Market for Moulds For Mineral Materials 2024
Market Size for Moulds For Mineral Materials in Europe
The Europe mould for mineral materials market was finally on the rise to reach $X in 2023, after two years of decline. Over the period under review, consumption, however, showed a mild descent. The level of consumption peaked at $X in 2018; however, from 2019 to 2023, consumption remained at a lower figure.
Production of Moulds For Mineral Materials in Europe
In value terms, mould for mineral materials production rose modestly to $X in 2023 estimated in export price. In general, production, however, continues to indicate a relatively flat trend pattern. The most prominent rate of growth was recorded in 2018 when the production volume increased by X% against the previous year. As a result, production reached the peak level of $X. From 2019 to 2023, production growth failed to regain momentum.
Exports of Moulds For Mineral Materials
Exports in Europe
In 2023, mould for mineral materials exports in Europe reduced modestly to X units, dropping by X% against the previous year. The total export volume increased at an average annual rate of X% over the period from 2012 to 2023; the trend pattern remained consistent, with somewhat noticeable fluctuations being recorded throughout the analyzed period. The pace of growth was the most pronounced in 2013 when exports increased by X%. Over the period under review, the exports attained the maximum at X units in 2021; however, from 2022 to 2023, the exports failed to regain momentum.
In value terms, mould for mineral materials exports expanded notably to $X in 2023. The total export value increased at an average annual rate of X% over the period from 2012 to 2023; the trend pattern indicated some noticeable fluctuations being recorded in certain years. The pace of growth appeared the most rapid in 2021 when exports increased by X% against the previous year. Over the period under review, the exports reached the maximum in 2023 and are expected to retain growth in the near future.
Exports by Country
Germany (X units) and Italy (X units) were the major exporters of moulds for mineral materials in 2023, resulting at near X% and X% of total exports, respectively. Belgium (X units) held a X% share (based on physical terms) of total exports, which put it in second place, followed by Switzerland (X%), Poland (X%) and Russia (X%). France (X units), Slovenia (X units), Serbia (X units), Spain (X units), Hungary (X units), Finland (X units) and Denmark (X units) took a little share of total exports.
From 2012 to 2023, the biggest increases were recorded for Slovenia (with a CAGR of X%), while shipments for the other leaders experienced more modest paces of growth.
In value terms, the largest mould for mineral materials supplying countries in Europe were Germany ($X), Italy ($X) and Poland ($X), together accounting for X% of total exports. Belgium, Spain, France, Denmark, Slovenia, Hungary, Switzerland, Russia, Finland and Serbia lagged somewhat behind, together accounting for a further X%.
Among the main exporting countries, Belgium, with a CAGR of X%, saw the highest rates of growth with regard to the value of exports, over the period under review, while shipments for the other leaders experienced more modest paces of growth.
Export Prices by Country
In 2023, the export price in Europe amounted to $X per unit, surging by X% against the previous year. Over the period from 2012 to 2023, it increased at an average annual rate of X%. As a result, the export price reached the peak level and is likely to continue growth in the immediate term.
Prices varied noticeably by country of origin: amid the top suppliers, the country with the highest price was Denmark ($X per unit), while Russia ($X per unit) was amongst the lowest.
From 2012 to 2023, the most notable rate of growth in terms of prices was attained by Poland (X%), while the other leaders experienced more modest paces of growth.
Imports of Moulds For Mineral Materials
Imports in Europe
Mould for mineral materials imports expanded sharply to X units in 2023, growing by X% on 2022. The total import volume increased at an average annual rate of X% from 2012 to 2023; the trend pattern remained relatively stable, with only minor fluctuations being recorded throughout the analyzed period. The most prominent rate of growth was recorded in 2021 when imports increased by X%. As a result, imports attained the peak of X units. From 2022 to 2023, the growth of imports remained at a somewhat lower figure.
In value terms, mould for mineral materials imports totaled $X in 2023. The total import value increased at an average annual rate of X% over the period from 2012 to 2023; the trend pattern remained consistent, with somewhat noticeable fluctuations in certain years. As a result, imports attained the peak and are likely to continue growth in the immediate term.
Imports by Country
In 2023, Germany (X units), distantly followed by Russia (X units), Ukraine (X units), the UK (X units), Sweden (X units), Romania (X units) and Serbia (X units) were the largest importers of moulds for mineral materials, together making up X% of total imports. France (X units), Belgium (X units), Poland (X units), the Czech Republic (X units), Austria (X units) and Switzerland (X units) held a little share of total imports.
From 2012 to 2023, average annual rates of growth with regard to mould for mineral materials imports into Germany stood at X%. At the same time, Serbia (X%), Sweden (X%), Belgium (X%), Romania (X%), Austria (X%), France (X%), the UK (X%), Poland (X%) and Ukraine (X%) displayed positive paces of growth. Moreover, Serbia emerged as the fastest-growing importer imported in Europe, with a CAGR of X% from 2012-2023. The Czech Republic experienced a relatively flat trend pattern. By contrast, Russia (X%) and Switzerland (X%) illustrated a downward trend over the same period. While the share of Germany (X p.p.), Serbia (X p.p.), Sweden (X p.p.), Belgium (X p.p.), the UK (X p.p.) and Romania (X p.p.) increased significantly in terms of the total imports from 2012-2023, the share of Switzerland (X p.p.) and Russia (X p.p.) displayed negative dynamics. The shares of the other countries remained relatively stable throughout the analyzed period.
In value terms, Germany ($X), the UK ($X) and Russia ($X) constituted the countries with the highest levels of imports in 2023, together accounting for X% of total imports. Poland, France, Belgium, the Czech Republic, Romania, Austria, Ukraine, Sweden, Switzerland and Serbia lagged somewhat behind, together accounting for a further X%.
Romania, with a CAGR of X%, recorded the highest growth rate of the value of imports, among the main importing countries over the period under review, while purchases for the other leaders experienced more modest paces of growth.
Import Prices by Country
The import price in Europe stood at $X per unit in 2023, picking up by X% against the previous year. Over the period from 2012 to 2023, it increased at an average annual rate of X%. The most prominent rate of growth was recorded in 2022 an increase of X%. Over the period under review, import prices attained the maximum in 2023 and is likely to see steady growth in years to come.
There were significant differences in the average prices amongst the major importing countries. In 2023, amid the top importers, the country with the highest price was Poland ($X per unit), while Serbia ($X per unit) was amongst the lowest.
From 2012 to 2023, the most notable rate of growth in terms of prices was attained by Romania (X%), while the other leaders experienced more modest paces of growth.
Source: IndexBox Platform
This report provides an in-depth analysis of the market for mould for mineral materials in Europe. Within it, you will discover the latest data on market trends and opportunities by country, consumption, production and price developments, as well as the global trade (imports and exports). The forecast exhibits the market prospects through 2030.
Product coverage:
- Prodcom 25735060 - Moulds for mineral materials
Country coverage:
- Albania
- Andorra
- Austria
- Belarus
- Belgium
- Bosnia and Herzegovina
- Bulgaria
- Croatia
- Czech Republic
- Denmark
- Estonia
- Faroe Islands
- Finland
- France
- Germany
- Gibraltar
- Greece
- Holy See
- Hungary
- Iceland
- Ireland
- Isle of Man
- Italy
- Latvia
- Liechtenstein
- Lithuania
- Luxembourg
- Malta
- Moldova
- Monaco
- Montenegro
- Netherlands
- North Macedonia
- Norway
- Poland
- Portugal
- Romania
- Russia
- San Marino
- Serbia
- Slovakia
- Slovenia
- Spain
- Sweden
- Switzerland
- Ukraine
- United Kingdom
Data coverage:
- Market volume and value
- Per Capita consumption
- Forecast of the market dynamics in the medium term
- Production in Europe, split by region and country
- Trade (exports and imports) in Europe
- Export and import prices
- Market trends, drivers and restraints
- Key market players and their profiles
Reasons to buy this report:
- Take advantage of the latest data
- Find deeper insights into current market developments
- Discover vital success factors affecting the market
This report is designed for manufacturers, distributors, importers, and wholesalers, as well as for investors, consultants and advisors.
In this report, you can find information that helps you to make informed decisions on the following issues:
- How to diversify your business and benefit from new market opportunities
- How to load your idle production capacity
- How to boost your sales on overseas markets
- How to increase your profit margins
- How to make your supply chain more sustainable
- How to reduce your production and supply chain costs
- How to outsource production to other countries
- How to prepare your business for global expansion
While doing this research, we combine the accumulated expertise of our analysts and the capabilities of artificial intelligence. The AI-based platform, developed by our data scientists, constitutes the key working tool for business analysts, empowering them to discover deep insights and ideas from the marketing data.
-
1. INTRODUCTION
Making Data-Driven Decisions to Grow Your Business
- REPORT DESCRIPTION
- RESEARCH METHODOLOGY AND AI PLATFORM
- DATA-DRIVEN DECISIONS FOR YOUR BUSINESS
- GLOSSARY AND SPECIFIC TERMS
-
2. EXECUTIVE SUMMARY
A Quick Overview of Market Performance
- KEY FINDINGS
- MARKET TRENDS This Chapter is Available Only for the Professional Edition PRO
-
3. MARKET OVERVIEW
Understanding the Current State of The Market and Its Prospects
- MARKET SIZE
- CONSUMPTION BY COUNTRY
- MARKET FORECAST TO 2030
-
4. MOST PROMISING PRODUCT
Finding New Products to Diversify Your Business
This Chapter is Available Only for the Professional Edition PRO- TOP PRODUCTS TO DIVERSIFY YOUR BUSINESS
- BEST-SELLING PRODUCTS
- MOST CONSUMED PRODUCT
- MOST TRADED PRODUCT
- MOST PROFITABLE PRODUCT FOR EXPORT
-
5. MOST PROMISING SUPPLYING COUNTRIES
Choosing the Best Countries to Establish Your Sustainable Supply Chain
This Chapter is Available Only for the Professional Edition PRO- TOP COUNTRIES TO SOURCE YOUR PRODUCT
- TOP PRODUCING COUNTRIES
- TOP EXPORTING COUNTRIES
- LOW-COST EXPORTING COUNTRIES
-
6. MOST PROMISING OVERSEAS MARKETS
Choosing the Best Countries to Boost Your Exports
This Chapter is Available Only for the Professional Edition PRO- TOP OVERSEAS MARKETS FOR EXPORTING YOUR PRODUCT
- TOP CONSUMING MARKETS
- UNSATURATED MARKETS
- TOP IMPORTING MARKETS
- MOST PROFITABLE MARKETS
7. PRODUCTION
The Latest Trends and Insights into The Industry
- PRODUCTION VOLUME AND VALUE
- PRODUCTION BY COUNTRY
8. IMPORTS
The Largest Importers on The Market and How They Succeed
- IMPORTS FROM 2012–2023
- IMPORTS BY COUNTRY
- IMPORT PRICES BY COUNTRY
9. EXPORTS
The Largest Exporters on The Market and How They Succeed
- EXPORTS FROM 2012–2023
- EXPORTS BY COUNTRY
- EXPORT PRICES BY COUNTRY
-
10. PROFILES OF MAJOR PRODUCERS
The Largest Producers on The Market and Their Profiles
This Chapter is Available Only for the Professional Edition PRO -
11. COUNTRY PROFILES
The Largest Markets And Their Profiles
This Chapter is Available Only for the Professional Edition PRO- Albania
- Andorra
- Austria
- Belarus
- Belgium
- Bosnia and Herzegovina
- Bulgaria
- Croatia
- Czech Republic
- Denmark
- Estonia
- Faroe Islands
- Finland
- France
- Germany
- Gibraltar
- Greece
- Holy See
- Hungary
- Iceland
- Ireland
- Italy
- Latvia
- Lithuania
- Luxembourg
- North Macedonia
- Malta
- Moldova
- Montenegro
- Netherlands
- Norway
- Poland
- Portugal
- Romania
- Russia
- San Marino
- Serbia
- Slovakia
- Slovenia
- Spain
- Sweden
- Switzerland
- Ukraine
- United Kingdom
- Liechtenstein
- Isle of Man
- Monaco
-
LIST OF TABLES
- Key Findings In 2023
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Per Capita Consumption, By Country, 2018–2023
- Production, In Physical Terms, By Country, 2012–2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country Of Destination, 2012–2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, By Country Of Origin, 2012–2023
-
LIST OF FIGURES
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Consumption, By Country, 2023
- Market Volume Forecast to 2030
- Market Value Forecast to 2030
- Products: Market Size And Growth, By Type
- Products: Average Per Capita Consumption, By Type
- Products: Exports And Growth, By Type
- Products: Export Prices And Growth, By Type
- Production Volume And Growth
- Exports And Growth
- Export Prices And Growth
- Market Size And Growth
- Per Capita Consumption
- Imports And Growth
- Import Prices
- Production, In Physical Terms, 2012–2023
- Production, In Value Terms, 2012–2023
- Production, By Country, 2023
- Production, In Physical Terms, By Country, 2012–2023
- Imports, In Physical Terms, 2012–2023
- Imports, In Value Terms, 2012–2023
- Imports, In Physical Terms, By Country, 2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country, 2012–2023
- Exports, In Physical Terms, 2012–2023
- Exports, In Value Terms, 2012–2023
- Exports, In Physical Terms, By Country, 2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, 2012–2023
Recommended reports
This report provides an in-depth analysis of the market for mould for mineral materials in Asia.
This report provides an in-depth analysis of the market for mould for mineral materials in the U.S..
This report provides an in-depth analysis of the market for mould for mineral materials in China.
This report provides an in-depth analysis of the market for mould for mineral materials in the EU.
This report provides an in-depth analysis of the global market for mould for mineral materials.