Europe - Mechanical Appliances for Projecting, Dispersing or Spraying - Market Analysis, Forecast, Size, Trends and Insights
Get instant access to more than 2 million reports, dashboards, and datasets on the IndexBox Platform.
View PricingEurope: Market for Mechanical Appliances For Projecting, Dispersing Or Spraying 2024
Market Size for Mechanical Appliances For Projecting, Dispersing Or Spraying in Europe
The Europe market for mechanical appliances for projecting, dispersing or spraying rose remarkably to $X in 2023, increasing by X% against the previous year. In general, consumption recorded a strong expansion. The level of consumption peaked in 2023 and is expected to retain growth in years to come.
Production of Mechanical Appliances For Projecting, Dispersing Or Spraying in Europe
In value terms, production of mechanical appliances for projecting, dispersing or spraying reduced slightly to $X in 2023 estimated in export price. Overall, production, however, saw a relatively flat trend pattern. The pace of growth appeared the most rapid in 2015 with an increase of X%. As a result, production attained the peak level of $X. From 2016 to 2023, production of growth failed to regain momentum.
Exports of Mechanical Appliances For Projecting, Dispersing Or Spraying
Exports in Europe
Exports of mechanical appliances for projecting, dispersing or spraying surged to X units in 2023, growing by X% against 2022. Over the period under review, exports showed buoyant growth. The pace of growth appeared the most rapid in 2020 with an increase of X% against the previous year. The volume of export peaked in 2023 and is likely to see gradual growth in years to come.
In value terms, exports of mechanical appliances for projecting, dispersing or spraying rose notably to $X in 2023. The total export value increased at an average annual rate of X% from 2012 to 2023; however, the trend pattern indicated some noticeable fluctuations being recorded in certain years. The growth pace was the most rapid in 2017 when exports increased by X% against the previous year. The level of export peaked in 2023 and is expected to retain growth in the immediate term.
Exports by Country
Switzerland was the largest exporting country with an export of around X units, which finished at X% of total exports. Germany (X units) held the second position in the ranking, distantly followed by Italy (X units). All these countries together held approx. X% share of total exports. France (X units), Belgium (X units), Austria (X units), the Netherlands (X units), Sweden (X units) and Poland (X units) followed a long way behind the leaders.
Exports from Switzerland increased at an average annual rate of X% from 2012 to 2023. At the same time, Belgium (X%), Italy (X%), the Netherlands (X%), Sweden (X%), Austria (X%) and France (X%) displayed positive paces of growth. Moreover, Belgium emerged as the fastest-growing exporter exported in Europe, with a CAGR of X% from 2012-2023. Poland experienced a relatively flat trend pattern. By contrast, Germany (X%) illustrated a downward trend over the same period. Germany (X p.p.), Italy (X p.p.), France (X p.p.), Belgium (X p.p.), Austria (X p.p.), the Netherlands (X p.p.), Sweden (X p.p.) and Poland (X p.p.) significantly strengthened its position in terms of the total exports, while Switzerland saw its share reduced by X% from 2012 to 2023, respectively.
In value terms, Germany ($X) remains the largest mechanical appliances for projecting, dispersing or spraying supplier in Europe, comprising X% of total exports. The second position in the ranking was held by Italy ($X), with a X% share of total exports. It was followed by Switzerland, with a X% share.
From 2012 to 2023, the average annual rate of growth in terms of value in Germany totaled X%. In the other countries, the average annual rates were as follows: Italy (X% per year) and Switzerland (X% per year).
Export Prices by Country
The export price in Europe stood at $X per unit in 2023, waning by X% against the previous year. Over the period under review, the export price saw a abrupt decline. The most prominent rate of growth was recorded in 2019 when the export price increased by X%. Over the period under review, the export prices hit record highs at $X per unit in 2012; however, from 2013 to 2023, the export prices stood at a somewhat lower figure.
Prices varied noticeably by country of origin: amid the top suppliers, the country with the highest price was Germany ($X per unit), while Switzerland ($X per unit) was amongst the lowest.
From 2012 to 2023, the most notable rate of growth in terms of prices was attained by Germany (X%), while the other leaders experienced mixed trends in the export price figures.
Imports of Mechanical Appliances For Projecting, Dispersing Or Spraying
Imports in Europe
In 2023, approx. X units of mechanical appliances for projecting, dispersing or spraying were imported in Europe; surging by X% against the year before. Overall, imports recorded a significant expansion. The pace of growth was the most pronounced in 2020 when imports increased by X% against the previous year. Over the period under review, imports of attained the maximum in 2023 and are expected to retain growth in years to come.
In value terms, imports of mechanical appliances for projecting, dispersing or spraying expanded significantly to $X in 2023. Total imports indicated a pronounced expansion from 2012 to 2023: its value increased at an average annual rate of X% over the last eleven-year period. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2023 figures, imports decreased by X% against 2021 indices. The most prominent rate of growth was recorded in 2018 with an increase of X%. Over the period under review, imports of hit record highs at $X in 2021; afterwards, it flattened through to 2023.
Imports by Country
Russia was the key importer of mechanical appliances for projecting, dispersing or spraying in Europe, with the volume of imports finishing at X units, which was approx. X% of total imports in 2023. It was distantly followed by Germany (X units) and France (X units), together mixing up a X% share of total imports. Austria (X units), the UK (X units), Italy (X units), Spain (X units), Poland (X units), the Netherlands (X units), Belgium (X units), Switzerland (X units), Belarus (X units) and the Czech Republic (X units) took a little share of total imports.
Russia was also the fastest-growing in terms of the mechanical appliances for projecting, dispersing or spraying imports, with a CAGR of X% from 2012 to 2023. At the same time, Italy (X%), the UK (X%), the Czech Republic (X%), Belarus (X%), France (X%) and Spain (X%) displayed positive paces of growth. By contrast, Poland (X%), Austria (X%), Switzerland (X%), Belgium (X%), the Netherlands (X%) and Germany (X%) illustrated a downward trend over the same period. Russia (X p.p.), Germany (X p.p.), France (X p.p.), Austria (X p.p.), Spain (X p.p.), Poland (X p.p.), the Netherlands (X p.p.), Belgium (X p.p.) and the Czech Republic (X p.p.) significantly strengthened its position in terms of the total imports, while the UK, Belarus and Switzerland saw its share reduced by X%, X% and X% from 2012 to 2023, respectively. The shares of the other countries remained relatively stable throughout the analyzed period.
In value terms, Germany ($X), France ($X) and Austria ($X) were the countries with the highest levels of imports in 2023, together comprising X% of total imports. The UK, Italy, Russia, Spain, Poland, the Netherlands, the Czech Republic, Belgium, Switzerland and Belarus lagged somewhat behind, together comprising a further X%.
In terms of the main importing countries, the Czech Republic, with a CAGR of X%, recorded the highest growth rate of the value of imports, over the period under review, while purchases for the other leaders experienced more modest paces of growth.
Import Prices by Country
The import price in Europe stood at $X per unit in 2023, declining by X% against the previous year. Over the period under review, the import price faced a deep downturn. The most prominent rate of growth was recorded in 2015 an increase of X%. The level of import peaked at $X per unit in 2016; however, from 2017 to 2023, import prices remained at a lower figure.
There were significant differences in the average prices amongst the major importing countries. In 2023, amid the top importers, the country with the highest price was the Czech Republic ($X per unit), while Russia ($X per unit) was amongst the lowest.
From 2012 to 2023, the most notable rate of growth in terms of prices was attained by Germany (X%), while the other leaders experienced more modest paces of growth.
Source: IndexBox Platform
This report provides an in-depth analysis of the market for mechanical appliances for projecting, dispersing or spraying in Europe. Within it, you will discover the latest data on market trends and opportunities by country, consumption, production and price developments, as well as the global trade (imports and exports). The forecast exhibits the market prospects through 2030.
Product coverage:
- Prodcom 28292240 - Other mechanical appliances for projecting, dispersing or spraying
Country coverage:
- Albania
- Andorra
- Austria
- Belarus
- Belgium
- Bosnia and Herzegovina
- Bulgaria
- Croatia
- Czech Republic
- Denmark
- Estonia
- Faroe Islands
- Finland
- France
- Germany
- Gibraltar
- Greece
- Holy See
- Hungary
- Iceland
- Ireland
- Isle of Man
- Italy
- Latvia
- Liechtenstein
- Lithuania
- Luxembourg
- Malta
- Moldova
- Monaco
- Montenegro
- Netherlands
- North Macedonia
- Norway
- Poland
- Portugal
- Romania
- Russia
- San Marino
- Serbia
- Slovakia
- Slovenia
- Spain
- Sweden
- Switzerland
- Ukraine
- United Kingdom
Data coverage:
- Market volume and value
- Per Capita consumption
- Forecast of the market dynamics in the medium term
- Production in Europe, split by region and country
- Trade (exports and imports) in Europe
- Export and import prices
- Market trends, drivers and restraints
- Key market players and their profiles
Reasons to buy this report:
- Take advantage of the latest data
- Find deeper insights into current market developments
- Discover vital success factors affecting the market
This report is designed for manufacturers, distributors, importers, and wholesalers, as well as for investors, consultants and advisors.
In this report, you can find information that helps you to make informed decisions on the following issues:
- How to diversify your business and benefit from new market opportunities
- How to load your idle production capacity
- How to boost your sales on overseas markets
- How to increase your profit margins
- How to make your supply chain more sustainable
- How to reduce your production and supply chain costs
- How to outsource production to other countries
- How to prepare your business for global expansion
While doing this research, we combine the accumulated expertise of our analysts and the capabilities of artificial intelligence. The AI-based platform, developed by our data scientists, constitutes the key working tool for business analysts, empowering them to discover deep insights and ideas from the marketing data.
-
1. INTRODUCTION
Making Data-Driven Decisions to Grow Your Business
- REPORT DESCRIPTION
- RESEARCH METHODOLOGY AND AI PLATFORM
- DATA-DRIVEN DECISIONS FOR YOUR BUSINESS
- GLOSSARY AND SPECIFIC TERMS
-
2. EXECUTIVE SUMMARY
A Quick Overview of Market Performance
- KEY FINDINGS
- MARKET TRENDS This Chapter is Available Only for the Professional Edition PRO
-
3. MARKET OVERVIEW
Understanding the Current State of The Market and Its Prospects
- MARKET SIZE
- CONSUMPTION BY COUNTRY
- MARKET FORECAST TO 2030
-
4. MOST PROMISING PRODUCT
Finding New Products to Diversify Your Business
This Chapter is Available Only for the Professional Edition PRO- TOP PRODUCTS TO DIVERSIFY YOUR BUSINESS
- BEST-SELLING PRODUCTS
- MOST CONSUMED PRODUCT
- MOST TRADED PRODUCT
- MOST PROFITABLE PRODUCT FOR EXPORT
-
5. MOST PROMISING SUPPLYING COUNTRIES
Choosing the Best Countries to Establish Your Sustainable Supply Chain
This Chapter is Available Only for the Professional Edition PRO- TOP COUNTRIES TO SOURCE YOUR PRODUCT
- TOP PRODUCING COUNTRIES
- TOP EXPORTING COUNTRIES
- LOW-COST EXPORTING COUNTRIES
-
6. MOST PROMISING OVERSEAS MARKETS
Choosing the Best Countries to Boost Your Exports
This Chapter is Available Only for the Professional Edition PRO- TOP OVERSEAS MARKETS FOR EXPORTING YOUR PRODUCT
- TOP CONSUMING MARKETS
- UNSATURATED MARKETS
- TOP IMPORTING MARKETS
- MOST PROFITABLE MARKETS
7. PRODUCTION
The Latest Trends and Insights into The Industry
- PRODUCTION VOLUME AND VALUE
- PRODUCTION BY COUNTRY
8. IMPORTS
The Largest Importers on The Market and How They Succeed
- IMPORTS FROM 2012–2023
- IMPORTS BY COUNTRY
- IMPORT PRICES BY COUNTRY
9. EXPORTS
The Largest Exporters on The Market and How They Succeed
- EXPORTS FROM 2012–2023
- EXPORTS BY COUNTRY
- EXPORT PRICES BY COUNTRY
-
10. PROFILES OF MAJOR PRODUCERS
The Largest Producers on The Market and Their Profiles
This Chapter is Available Only for the Professional Edition PRO -
11. COUNTRY PROFILES
The Largest Markets And Their Profiles
This Chapter is Available Only for the Professional Edition PRO- Albania
- Andorra
- Austria
- Belarus
- Belgium
- Bosnia and Herzegovina
- Bulgaria
- Croatia
- Czech Republic
- Denmark
- Estonia
- Faroe Islands
- Finland
- France
- Germany
- Gibraltar
- Greece
- Holy See
- Hungary
- Iceland
- Ireland
- Italy
- Latvia
- Lithuania
- Luxembourg
- North Macedonia
- Malta
- Moldova
- Montenegro
- Netherlands
- Norway
- Poland
- Portugal
- Romania
- Russia
- San Marino
- Serbia
- Slovakia
- Slovenia
- Spain
- Sweden
- Switzerland
- Ukraine
- United Kingdom
- Liechtenstein
- Isle of Man
- Monaco
-
LIST OF TABLES
- Key Findings In 2023
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Per Capita Consumption, By Country, 2018–2023
- Production, In Physical Terms, By Country, 2012–2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country Of Destination, 2012–2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, By Country Of Origin, 2012–2023
-
LIST OF FIGURES
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Consumption, By Country, 2023
- Market Volume Forecast to 2030
- Market Value Forecast to 2030
- Products: Market Size And Growth, By Type
- Products: Average Per Capita Consumption, By Type
- Products: Exports And Growth, By Type
- Products: Export Prices And Growth, By Type
- Production Volume And Growth
- Exports And Growth
- Export Prices And Growth
- Market Size And Growth
- Per Capita Consumption
- Imports And Growth
- Import Prices
- Production, In Physical Terms, 2012–2023
- Production, In Value Terms, 2012–2023
- Production, By Country, 2023
- Production, In Physical Terms, By Country, 2012–2023
- Imports, In Physical Terms, 2012–2023
- Imports, In Value Terms, 2012–2023
- Imports, In Physical Terms, By Country, 2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country, 2012–2023
- Exports, In Physical Terms, 2012–2023
- Exports, In Value Terms, 2012–2023
- Exports, In Physical Terms, By Country, 2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, 2012–2023
Recommended reports
This report provides an in-depth analysis of the market for mechanical appliances for projecting, dispersing or spraying in Asia.
This report provides an in-depth analysis of the market for mechanical appliances for projecting, dispersing or spraying in the U.S..
This report provides an in-depth analysis of the market for mechanical appliances for projecting, dispersing or spraying in China.
This report provides an in-depth analysis of the market for mechanical appliances for projecting, dispersing or spraying in the EU.
This report provides an in-depth analysis of the global market for mechanical appliances for projecting, dispersing or spraying.