EU - Machinery for Solid-Liquid Separation - Market Analysis, Forecast, Size, Trends and Insights
Get instant access to more than 2 million reports, dashboards, and datasets on the IndexBox Platform.
View PricingEU: Solid-Liquid Separator Market 2024
Solid-Liquid Separator Market Size in the EU
The EU solid-liquid separator market shrank dramatically to $X in 2023, waning by X% against the previous year. In general, consumption, however, continues to indicate a pronounced descent. Over the period under review, the market reached the peak level at $X in 2018; however, from 2019 to 2023, consumption stood at a somewhat lower figure.
Solid-Liquid Separator Production in the EU
In value terms, solid-liquid separator production fell to $X in 2023 estimated in export price. In general, production continues to indicate a relatively flat trend pattern. The pace of growth was the most pronounced in 2018 with an increase of X%. The level of production peaked at $X in 2022, and then contracted in the following year.
Solid-Liquid Separator Exports
Exports in the EU
In 2023, after six years of growth, there was decline in shipments abroad of machinery for solid-liquid separation, when their volume decreased by X% to X units. In general, exports, however, showed significant growth. The most prominent rate of growth was recorded in 2019 when exports increased by X% against the previous year. The volume of export peaked at X units in 2022, and then dropped modestly in the following year.
In value terms, solid-liquid separator exports totaled $X in 2023. Total exports indicated a prominent expansion from 2012 to 2023: its value increased at an average annual rate of X% over the last eleven years. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2023 figures, exports increased by X% against 2015 indices. The most prominent rate of growth was recorded in 2021 with an increase of X% against the previous year. The level of export peaked in 2023 and is likely to see steady growth in the immediate term.
Exports by Country
Germany was the largest exporting country with an export of about X units, which resulted at X% of total exports. Italy (X units) held the second position in the ranking, followed by France (X units) and Belgium (X units). All these countries together took near X% share of total exports. The following exporters - the Czech Republic (X units), the Netherlands (X units), Denmark (X units), Poland (X units), Romania (X units), Finland (X units) and Spain (X units) - together made up X% of total exports.
From 2012 to 2023, average annual rates of growth with regard to solid-liquid separator exports from Germany stood at X%. At the same time, Italy (X%), Finland (X%), Belgium (X%), the Czech Republic (X%), Denmark (X%), Spain (X%), France (X%), Poland (X%) and the Netherlands (X%) displayed positive paces of growth. Moreover, Italy emerged as the fastest-growing exporter exported in the European Union, with a CAGR of X% from 2012-2023. By contrast, Romania (X%) illustrated a downward trend over the same period. While the share of Germany (X p.p.), Italy (X p.p.), France (X p.p.), Belgium (X p.p.), the Czech Republic (X p.p.), the Netherlands (X p.p.), Denmark (X p.p.), Poland (X p.p.), Romania (X p.p.) and Finland (X p.p.) increased significantly in terms of the total exports from 2012-2023, the share of Spain (X p.p.) displayed negative dynamics.
In value terms, Germany ($X) remains the largest solid-liquid separator supplier in the European Union, comprising X% of total exports. The second position in the ranking was taken by France ($X), with an X% share of total exports. It was followed by Belgium, with an X% share.
From 2012 to 2023, the average annual growth rate of value in Germany stood at X%. In the other countries, the average annual rates were as follows: France (X% per year) and Belgium (X% per year).
Export Prices by Country
The export price in the European Union stood at $X per unit in 2023, growing by X% against the previous year. Over the period under review, the export price, however, continues to indicate a dramatic descent. The pace of growth appeared the most rapid in 2016 an increase of X% against the previous year. Over the period under review, the export prices attained the peak figure at $X per unit in 2014; however, from 2015 to 2023, the export prices remained at a lower figure.
Prices varied noticeably by country of origin: amid the top suppliers, the country with the highest price was the Netherlands ($X per unit), while the Czech Republic ($X per unit) was amongst the lowest.
From 2012 to 2023, the most notable rate of growth in terms of prices was attained by the Netherlands (X%), while the other leaders experienced a decline in the export price figures.
Solid-Liquid Separator Imports
Imports in the EU
In 2023, after three years of growth, there was decline in supplies from abroad of machinery for solid-liquid separation, when their volume decreased by X% to X units. Overall, imports, however, continue to indicate a significant expansion. The pace of growth was the most pronounced in 2020 with an increase of X% against the previous year. Over the period under review, imports hit record highs at X units in 2022, and then shrank modestly in the following year.
In value terms, solid-liquid separator imports declined slightly to $X in 2023. Over the period under review, imports, however, posted a buoyant expansion. The pace of growth was the most pronounced in 2021 when imports increased by X%. The level of import peaked at $X in 2022, and then fell slightly in the following year.
Imports by Country
In 2023, Belgium (X units) and Germany (X units) represented the main importers of machinery for solid-liquid separation in the European Union, together achieving X% of total imports. Italy (X units) held the next position in the ranking, followed by France (X units), Spain (X units), the Czech Republic (X units) and the Netherlands (X units). All these countries together took near X% share of total imports. Poland (X units), Denmark (X units), Hungary (X units), Austria (X units), Romania (X units) and Ireland (X units) held a relatively small share of total imports.
From 2012 to 2023, the most notable rate of growth in terms of purchases, amongst the leading importing countries, was attained by Hungary (with a CAGR of X%), while imports for the other leaders experienced more modest paces of growth.
In value terms, Germany ($X), France ($X) and Belgium ($X) constituted the countries with the highest levels of imports in 2023, with a combined X% share of total imports. Italy, Ireland, the Netherlands, Spain, Austria, Denmark, the Czech Republic, Hungary, Poland and Romania lagged somewhat behind, together comprising a further X%.
Among the main importing countries, Ireland, with a CAGR of X%, recorded the highest rates of growth with regard to the value of imports, over the period under review, while purchases for the other leaders experienced more modest paces of growth.
Import Prices by Country
The import price in the European Union stood at $X per unit in 2023, therefore, remained relatively stable against the previous year. Over the period under review, the import price, however, faced a sharp reduction. The most prominent rate of growth was recorded in 2015 when the import price increased by X%. Over the period under review, import prices reached the maximum at $X per unit in 2016; however, from 2017 to 2023, import prices stood at a somewhat lower figure.
Prices varied noticeably by country of destination: amid the top importers, the country with the highest price was Ireland ($X per unit), while the Czech Republic ($X per unit) was amongst the lowest.
From 2012 to 2023, the most notable rate of growth in terms of prices was attained by Ireland (X%), while the other leaders experienced mixed trends in the import price figures.
Source: IndexBox Platform
This report provides an in-depth analysis of the solid-liquid separator market in the EU. Within it, you will discover the latest data on market trends and opportunities by country, consumption, production and price developments, as well as the global trade (imports and exports). The forecast exhibits the market prospects through 2030.
Product coverage:
- Prodcom 28291270 - Machinery and apparatus for solid-liquid separation/ purification excluding for water and beverages, centrifuges and centrifugal dryers, oil/petrol filters for internal combustion engines
Country coverage:
- Austria
- Belgium
- Bulgaria
- Croatia
- Cyprus
- Czech Republic
- Denmark
- Estonia
- Finland
- France
- Germany
- Greece
- Hungary
- Ireland
- Italy
- Latvia
- Lithuania
- Luxembourg
- Malta
- Netherlands
- Poland
- Portugal
- Romania
- Slovakia
- Slovenia
- Spain
- Sweden
Data coverage:
- Market volume and value
- Per Capita consumption
- Forecast of the market dynamics in the medium term
- Production in the EU, split by region and country
- Trade (exports and imports) in the EU
- Export and import prices
- Market trends, drivers and restraints
- Key market players and their profiles
Reasons to buy this report:
- Take advantage of the latest data
- Find deeper insights into current market developments
- Discover vital success factors affecting the market
This report is designed for manufacturers, distributors, importers, and wholesalers, as well as for investors, consultants and advisors.
In this report, you can find information that helps you to make informed decisions on the following issues:
- How to diversify your business and benefit from new market opportunities
- How to load your idle production capacity
- How to boost your sales on overseas markets
- How to increase your profit margins
- How to make your supply chain more sustainable
- How to reduce your production and supply chain costs
- How to outsource production to other countries
- How to prepare your business for global expansion
While doing this research, we combine the accumulated expertise of our analysts and the capabilities of artificial intelligence. The AI-based platform, developed by our data scientists, constitutes the key working tool for business analysts, empowering them to discover deep insights and ideas from the marketing data.
-
1. INTRODUCTION
Making Data-Driven Decisions to Grow Your Business
- REPORT DESCRIPTION
- RESEARCH METHODOLOGY AND AI PLATFORM
- DATA-DRIVEN DECISIONS FOR YOUR BUSINESS
- GLOSSARY AND SPECIFIC TERMS
-
2. EXECUTIVE SUMMARY
A Quick Overview of Market Performance
- KEY FINDINGS
- MARKET TRENDS This Chapter is Available Only for the Professional Edition PRO
-
3. MARKET OVERVIEW
Understanding the Current State of The Market and Its Prospects
- MARKET SIZE
- CONSUMPTION BY COUNTRY
- MARKET FORECAST TO 2030
-
4. MOST PROMISING PRODUCT
Finding New Products to Diversify Your Business
This Chapter is Available Only for the Professional Edition PRO- TOP PRODUCTS TO DIVERSIFY YOUR BUSINESS
- BEST-SELLING PRODUCTS
- MOST CONSUMED PRODUCT
- MOST TRADED PRODUCT
- MOST PROFITABLE PRODUCT FOR EXPORT
-
5. MOST PROMISING SUPPLYING COUNTRIES
Choosing the Best Countries to Establish Your Sustainable Supply Chain
This Chapter is Available Only for the Professional Edition PRO- TOP COUNTRIES TO SOURCE YOUR PRODUCT
- TOP PRODUCING COUNTRIES
- TOP EXPORTING COUNTRIES
- LOW-COST EXPORTING COUNTRIES
-
6. MOST PROMISING OVERSEAS MARKETS
Choosing the Best Countries to Boost Your Exports
This Chapter is Available Only for the Professional Edition PRO- TOP OVERSEAS MARKETS FOR EXPORTING YOUR PRODUCT
- TOP CONSUMING MARKETS
- UNSATURATED MARKETS
- TOP IMPORTING MARKETS
- MOST PROFITABLE MARKETS
7. PRODUCTION
The Latest Trends and Insights into The Industry
- PRODUCTION VOLUME AND VALUE
- PRODUCTION BY COUNTRY
8. IMPORTS
The Largest Importers on The Market and How They Succeed
- IMPORTS FROM 2012–2023
- IMPORTS BY COUNTRY
- IMPORT PRICES BY COUNTRY
9. EXPORTS
The Largest Exporters on The Market and How They Succeed
- EXPORTS FROM 2012–2023
- EXPORTS BY COUNTRY
- EXPORT PRICES BY COUNTRY
-
10. PROFILES OF MAJOR PRODUCERS
The Largest Producers on The Market and Their Profiles
This Chapter is Available Only for the Professional Edition PRO -
11. COUNTRY PROFILES
The Largest Markets And Their Profiles
This Chapter is Available Only for the Professional Edition PRO- Austria
- Belgium
- Bulgaria
- Croatia
- Cyprus
- Czech Republic
- Denmark
- Estonia
- Finland
- France
- Germany
- Greece
- Hungary
- Ireland
- Italy
- Latvia
- Lithuania
- Luxembourg
- Malta
- Netherlands
- Poland
- Portugal
- Romania
- Slovakia
- Slovenia
- Spain
- Sweden
-
LIST OF TABLES
- Key Findings In 2023
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Per Capita Consumption, By Country, 2018–2023
- Production, In Physical Terms, By Country, 2012–2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country Of Destination, 2012–2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, By Country Of Origin, 2012–2023
-
LIST OF FIGURES
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Consumption, By Country, 2023
- Market Volume Forecast to 2030
- Market Value Forecast to 2030
- Products: Market Size And Growth, By Type
- Products: Average Per Capita Consumption, By Type
- Products: Exports And Growth, By Type
- Products: Export Prices And Growth, By Type
- Production Volume And Growth
- Exports And Growth
- Export Prices And Growth
- Market Size And Growth
- Per Capita Consumption
- Imports And Growth
- Import Prices
- Production, In Physical Terms, 2012–2023
- Production, In Value Terms, 2012–2023
- Production, By Country, 2023
- Production, In Physical Terms, By Country, 2012–2023
- Imports, In Physical Terms, 2012–2023
- Imports, In Value Terms, 2012–2023
- Imports, In Physical Terms, By Country, 2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country, 2012–2023
- Exports, In Physical Terms, 2012–2023
- Exports, In Value Terms, 2012–2023
- Exports, In Physical Terms, By Country, 2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, 2012–2023
Recommended reports
This report provides an in-depth analysis of the solid-liquid separator market in Asia.
This report provides an in-depth analysis of the solid-liquid separator market in the U.S..
This report provides an in-depth analysis of the solid-liquid separator market in China.
This report provides an in-depth analysis of the global solid-liquid separator market.