Australia - Plastic Plates, Sheets, Film, Foil and Strip - Market Analysis, Forecast, Size, Trends and Insights
Get instant access to more than 2 million reports, dashboards, and datasets on the IndexBox Platform.
View PricingAustralia: Market for Plastic Plates, Sheets, Film, Foil And Strip 2024
Market Size for Plastic Plates, Sheets, Film, Foil And Strip in Australia
For the third consecutive year, the Australian market for plastic plates, sheets, film, foil and strip recorded growth in sales value, which increased by X% to $X in 2022. In general, the total consumption indicated a moderate increase from 2012 to 2022: its value increased at an average annual rate of X% over the last decade. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2022 figures, consumption increased by X% against 2016 indices. Over the period under review, the market hit record highs in 2022 and is expected to retain growth in years to come.
Exports of Plastic Plates, Sheets, Film, Foil And Strip
Exports from Australia
In 2022, overseas shipments of plastic plates, sheets, film, foil and strip increased by X% to X tons, rising for the second year in a row after four years of decline. In general, exports, however, recorded a abrupt setback. The exports peaked at X tons in 2016; however, from 2017 to 2022, the exports failed to regain momentum.
In value terms, exports of plastic plates, sheets, film, foil and strip surged to $X in 2022. Over the period under review, exports, however, continue to indicate a pronounced curtailment. The exports peaked at $X in 2016; however, from 2017 to 2022, the exports failed to regain momentum.
Exports by Country
New Zealand (X tons), the United States (X tons) and South Korea (X tons) were the main destinations of exports of plastic plates, sheets, film, foil and strip from Australia, with a combined X% share of total exports. Malaysia, China, Fiji, Vietnam, Taiwan (Chinese), Papua New Guinea and Japan lagged somewhat behind, together comprising a further X%.
From 2012 to 2022, the most notable rate of growth in terms of shipments, amongst the main countries of destination, was attained by Malaysia (with a CAGR of X%), while the other leaders experienced a decline.
In value terms, New Zealand ($X), the United States ($X) and South Korea ($X) constituted the largest markets for plastic plate, sheet, film, foil and strip exported from Australia worldwide, together comprising X% of total exports.
In terms of the main countries of destination, the United States, with a CAGR of X%, saw the highest growth rate of the value of exports, over the period under review, while shipments for the other leaders experienced a decline.
Export Prices by Country
In 2022, the average export price for plastic plates, sheets, film, foil and strip amounted to $X per ton, with an increase of X% against the previous year. In general, export price indicated resilient growth from 2012 to 2022: its price increased at an average annual rate of X% over the last decade. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2022 figures, export price for plastic plates, sheets, film, foil and strip increased by X% against 2019 indices. The pace of growth appeared the most rapid in 2021 an increase of X% against the previous year. The export price peaked in 2022 and is expected to retain growth in the near future.
Prices varied noticeably by country of destination: amid the top suppliers, the country with the highest price was Papua New Guinea ($X per ton), while the average price for exports to Malaysia ($X per ton) was amongst the lowest.
From 2012 to 2022, the most notable rate of growth in terms of prices was recorded for supplies to Nigeria (X%), while the prices for the other major destinations experienced more modest paces of growth.
Imports of Plastic Plates, Sheets, Film, Foil And Strip
Imports into Australia
In 2022, imports of plastic plates, sheets, film, foil and strip into Australia expanded slightly to X tons, growing by X% against 2021 figures. The total import volume increased at an average annual rate of X% from 2012 to 2022; the trend pattern remained consistent, with only minor fluctuations being recorded in certain years. The pace of growth appeared the most rapid in 2015 when imports increased by X%. Over the period under review, imports of hit record highs in 2022 and are likely to continue growth in the near future.
In value terms, imports of plastic plates, sheets, film, foil and strip rose significantly to $X in 2022. The total import value increased at an average annual rate of X% from 2012 to 2022; the trend pattern indicated some noticeable fluctuations being recorded throughout the analyzed period. The most prominent rate of growth was recorded in 2021 with an increase of X% against the previous year. Imports peaked in 2022 and are expected to retain growth in the immediate term.
Imports by Country
China (X tons), Malaysia (X tons) and Thailand (X tons) were the main suppliers of imports of plastic plates, sheets, film, foil and strip to Australia, together comprising X% of total imports. Taiwan (Chinese), Indonesia, Germany, the United States, the United Arab Emirates, South Korea, Vietnam, the Philippines, India and the UK lagged somewhat behind, together comprising a further X%.
From 2012 to 2022, the most notable rate of growth in terms of purchases, amongst the main suppliers, was attained by the Philippines (with a CAGR of X%), while imports for the other leaders experienced more modest paces of growth.
In value terms, China ($X), Malaysia ($X) and Thailand ($X) appeared to be the largest plastic plate, sheet, film, foil and strip suppliers to Australia, with a combined X% share of total imports. The United States, Germany, Taiwan (Chinese), Indonesia, the UK, South Korea, the United Arab Emirates, India, Vietnam and the Philippines lagged somewhat behind, together accounting for a further X%.
In terms of the main suppliers, the Philippines, with a CAGR of X%, saw the highest rates of growth with regard to the value of imports, over the period under review, while purchases for the other leaders experienced more modest paces of growth.
Import Prices by Country
The average import price for plastic plates, sheets, film, foil and strip stood at $X per ton in 2022, increasing by X% against the previous year. In general, the import price saw a relatively flat trend pattern. The pace of growth appeared the most rapid in 2017 when the average import price increased by X%. The import price peaked in 2022 and is likely to continue growth in the near future.
There were significant differences in the average prices amongst the major supplying countries. In 2022, amid the top importers, the country with the highest price was the United States ($X per ton), while the price for the Philippines ($X per ton) was amongst the lowest.
From 2012 to 2022, the most notable rate of growth in terms of prices was attained by the United Arab Emirates (X%), while the prices for the other major suppliers experienced more modest paces of growth.
Source: IndexBox Platform
Frequently Asked Questions (FAQ) :
This report provides an in-depth analysis of the market for plastic plate, sheet, film, foil and strip in Australia. Within it, you will discover the latest data on market trends and opportunities by country, consumption, production and price developments, as well as the global trade (imports and exports). The forecast exhibits the market prospects through 2030.
Product coverage:
- Prodcom 22213010 - Other plates..., of polymers of ethylene, not reinforced, t hickness . 0,125 mm
- Prodcom 22213017 - Other plates..., of polymers of ethylene, not reinforced, etc., t hickness > 0,125 mm
- Prodcom 22213021 - Other plates..., of biaxially orientated polymers of propylene, t hickness . 0,10 mm
- Prodcom 22213023 - Other plates..., of polymers of propylene, thickness . 0,10 mm, others
- Prodcom 22213026 - Strip of polymers of propylene, of a thickness of > 0,10 mm and a width of > 5 mm but . .20 mm, of the kind used for packaging (excluding self-adhesive products)
- Prodcom 22213030 - Other plates..., of polymers of styrene, not reinforced, etc.
- Prodcom 22213035 - Other plates, sheets, film, foil and strip, of polymers of vinyl chloride, containing . 6 % of plasticisers, thickness . 1 mm
- Prodcom 22213036 - Other plates, sheets, film, foil and strip, of polymers of vinyl chloride, containing . 6 % of plasticisers, thickness > 1 mm
- Prodcom 22213037 - Other plates, sheets, film, foil and strip, of polymers of vinyl chloride, containing < 6 % of plasticisers, thickness . 1 mm
- Prodcom 22213038 - Other plates, sheets, film, foil and strip, of polymers of vinyl chloride, containing < 6 % of plasticisers, thickness > 1 mm
- Prodcom 22213053 - Plates..., of polymethyl methacrylate, not reinforced, etc.
- Prodcom 22213059 - Plates..., of other acrylic polymers, not reinforced, etc., n.e.c.
- Prodcom 22213061 - Plates, sheets, film, foil, strip of polycarbonates, non-cellular excluding floor, wall, ceiling coverings - self-adhesive, r einforced, laminated, supported/similarly combined with other materials
- Prodcom 22213063 - Plates..., of unsaturated polyesters, not reinforced, etc.
- Prodcom 22213065 - Plates, sheets, film, foil, strip, of polyethylene terephthalate, n ot reinforced, etc., of a thickness . 0,35 mm
- Prodcom 22213067 - Plates, sheets, film, foil, strip, of polyethylene terephthalate, n ot reinforced, etc., of a thickness > 0,35 mm
- Prodcom 22213069 - Plates, sheets, film, foil, strip of polyesters, non-cellular excluding floor, wall, ceiling coverings, self-adhesive - of polycarbonates, polyethylene terephthalate, unsaturated polyesters
- Prodcom 22213070 - Plates, sheets, film, foil and strip, of non-cellular cellulose or its chemical derivatives, not reinforced, laminated, supported or similarly combined with other materials (excluding selfadhesive products as well as and floor, wall and ceiling coverings of HS
- Prodcom 22213082 - Plates, sheets, film, foil, strip of polyamides, non-cellular (excluding floor, wall, ceiling coverings, self-adhesive, r einforced, laminated, supported/similarly combined with other materials)
- Prodcom 22213086 - Plates, sheets, film, foil and strip, of non-cellular poly(vinyl butyral), amino-resins, phenolic resins or polymerisation products, not reinforced, laminated, supported or similarly combined with other materials (excluding self-adhesive products as well as and floor, wall and ceiling coverings of HS
- Prodcom 22213090 - Plates, sheets, film, foil and strip, of non-cellular plastics, n .e.c., not reinforced, laminated, supported or similarly combined with other materials (excluding self-adhesive products, floor, wall and ceiling coverings of HS
Country coverage:
- Australia
Data coverage:
- Market volume and value
- Per Capita consumption
- Forecast of the market dynamics in the medium term
- Trade (exports and imports) in Australia
- Export and import prices
- Market trends, drivers and restraints
- Key market players and their profiles
Reasons to buy this report:
- Take advantage of the latest data
- Find deeper insights into current market developments
- Discover vital success factors affecting the market
This report is designed for manufacturers, distributors, importers, and wholesalers, as well as for investors, consultants and advisors.
In this report, you can find information that helps you to make informed decisions on the following issues:
- How to diversify your business and benefit from new market opportunities
- How to load your idle production capacity
- How to boost your sales on overseas markets
- How to increase your profit margins
- How to make your supply chain more sustainable
- How to reduce your production and supply chain costs
- How to outsource production to other countries
- How to prepare your business for global expansion
While doing this research, we combine the accumulated expertise of our analysts and the capabilities of artificial intelligence. The AI-based platform, developed by our data scientists, constitutes the key working tool for business analysts, empowering them to discover deep insights and ideas from the marketing data.
-
1. INTRODUCTION
Making Data-Driven Decisions to Grow Your Business
- REPORT DESCRIPTION
- RESEARCH METHODOLOGY AND AI PLATFORM
- DATA-DRIVEN DECISIONS FOR YOUR BUSINESS
- GLOSSARY AND SPECIFIC TERMS
-
2. EXECUTIVE SUMMARY
A Quick Overview of Market Performance
- KEY FINDINGS
- MARKET TRENDS This Chapter is Available Only for the Professional Edition PRO
-
3. MARKET OVERVIEW
Understanding the Current State of The Market and Its Prospects
- MARKET SIZE
- MARKET STRUCTURE
- TRADE BALANCE
- PER CAPITA CONSUMPTION
- MARKET FORECAST TO 2030
-
4. MOST PROMISING PRODUCT
Finding New Products to Diversify Your Business
This Chapter is Available Only for the Professional Edition PRO- TOP PRODUCTS TO DIVERSIFY YOUR BUSINESS
- BEST-SELLING PRODUCTS
- MOST CONSUMED PRODUCT
- MOST TRADED PRODUCT
- MOST PROFITABLE PRODUCT FOR EXPORT
-
5. MOST PROMISING SUPPLYING COUNTRIES
Choosing the Best Countries to Establish Your Sustainable Supply Chain
This Chapter is Available Only for the Professional Edition PRO- TOP COUNTRIES TO SOURCE YOUR PRODUCT
- TOP PRODUCING COUNTRIES
- TOP EXPORTING COUNTRIES
- LOW-COST EXPORTING COUNTRIES
-
6. MOST PROMISING OVERSEAS MARKETS
Choosing the Best Countries to Boost Your Exports
This Chapter is Available Only for the Professional Edition PRO- TOP OVERSEAS MARKETS FOR EXPORTING YOUR PRODUCT
- TOP CONSUMING MARKETS
- UNSATURATED MARKETS
- TOP IMPORTING MARKETS
- MOST PROFITABLE MARKETS
7. PRODUCTION
The Latest Trends and Insights into The Industry
- PRODUCTION VOLUME AND VALUE
8. IMPORTS
The Largest Import Supplying Countries
- IMPORTS FROM 2012–2023
- IMPORTS BY COUNTRY
- IMPORT PRICES BY COUNTRY
9. EXPORTS
The Largest Destinations for Exports
- EXPORTS FROM 2012–2023
- EXPORTS BY COUNTRY
- EXPORT PRICES BY COUNTRY
-
10. PROFILES OF MAJOR PRODUCERS
The Largest Producers on The Market and Their Profiles
This Chapter is Available Only for the Professional Edition PRO -
LIST OF TABLES
- Key Findings In 2023
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Per Capita Consumption In 2012-2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country Of Origin, 2012–2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, By Country Of Destination, 2012–2023
-
LIST OF FIGURES
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Market Structure – Domestic Supply vs. Imports, In Physical Terms, 2012-2023
- Market Structure – Domestic Supply vs. Imports, In Value Terms, 2012-2023
- Trade Balance, In Physical Terms, 2012-2023
- Trade Balance, In Value Terms, 2012-2023
- Per Capita Consumption, 2012-2023
- Market Volume Forecast to 2030
- Market Value Forecast to 2030
- Products: Market Size And Growth, By Type
- Products: Average Per Capita Consumption, By Type
- Products: Exports And Growth, By Type
- Products: Export Prices And Growth, By Type
- Production Volume And Growth
- Exports And Growth
- Export Prices And Growth
- Market Size And Growth
- Per Capita Consumption
- Imports And Growth
- Import Prices
- Production, In Physical Terms, 2012–2023
- Production, In Value Terms, 2012–2023
- Imports, In Physical Terms, 2012–2023
- Imports, In Value Terms, 2012–2023
- Imports, In Physical Terms, By Country, 2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country Of Origin, 2012–2023
- Exports, In Physical Terms, 2012–2023
- Exports, In Value Terms, 2012–2023
- Exports, In Physical Terms, By Country, 2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, By Country Of Destination, 2012–2023
Recommended reports
This report provides an in-depth analysis of the market for plastic plate, sheet, film, foil and strip in Asia.
This report provides an in-depth analysis of the market for plastic plate, sheet, film, foil and strip in the U.S..
This report provides an in-depth analysis of the market for plastic plate, sheet, film, foil and strip in China.
This report provides an in-depth analysis of the market for plastic plate, sheet, film, foil and strip in the EU.
This report provides an in-depth analysis of the global market for plastic plate, sheet, film, foil and strip.