ASEAN: Market for Aluminium Doors, Thresholds For Doors And Windows 2024

Market Size for Aluminium Doors, Thresholds For Doors And Windows in ASEAN

The ASEAN aluminium window and door market was estimated at $X in 2022, increasing by X% against the previous year. The total consumption indicated a measured increase from 2012 to 2022: its value increased at an average annual rate of X% over the last decade. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2022 figures, consumption decreased by X% against 2020 indices. Over the period under review, the market attained the maximum level at $X in 2020; however, from 2021 to 2022, consumption remained at a lower figure.

Production of Aluminium Doors, Thresholds For Doors And Windows in ASEAN

In value terms, aluminium window and door production stood at $X in 2022 estimated in export price. The total output value increased at an average annual rate of X% from 2012 to 2022; however, the trend pattern indicated some noticeable fluctuations being recorded throughout the analyzed period. The growth pace was the most rapid in 2019 when the production volume increased by X% against the previous year. Over the period under review, production reached the peak level at $X in 2020; afterwards, it flattened through to 2022.

Exports of Aluminium Doors, Thresholds For Doors And Windows

Exports in ASEAN

In 2022, the amount of aluminium doors, thresholds for doors and windows exported in ASEAN amounted to X units, growing by X% compared with the year before. Total exports indicated buoyant growth from 2012 to 2022: its volume increased at an average annual rate of X% over the last decade. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2022 figures, exports increased by X% against 2019 indices. The most prominent rate of growth was recorded in 2013 with an increase of X%. The volume of export peaked in 2022 and is likely to see steady growth in years to come.

In value terms, aluminium window and door exports rose sharply to $X in 2022. The total export value increased at an average annual rate of X% from 2012 to 2022; however, the trend pattern indicated some noticeable fluctuations being recorded throughout the analyzed period. The pace of growth appeared the most rapid in 2013 when exports increased by X% against the previous year. Over the period under review, the exports reached the maximum in 2022 and are likely to see steady growth in years to come.

Exports by Country

Thailand represented the key exporter of aluminium doors, thresholds for doors and windows in ASEAN, with the volume of exports accounting for X units, which was approx. X% of total exports in 2022. Malaysia (X units) took the second position in the ranking, distantly followed by the Philippines (X units), Vietnam (X units) and Singapore (X units). All these countries together held approx. X% share of total exports. Indonesia (X units) followed a long way behind the leaders.

From 2012 to 2022, average annual rates of growth with regard to aluminium window and door exports from Thailand stood at X%. At the same time, the Philippines (X%), Vietnam (X%), Singapore (X%) and Malaysia (X%) displayed positive paces of growth. Moreover, the Philippines emerged as the fastest-growing exporter exported in ASEAN, with a CAGR of X% from 2012-2022. By contrast, Indonesia (X%) illustrated a downward trend over the same period. Malaysia (X p.p.), the Philippines (X p.p.), Vietnam (X p.p.) and Singapore (X p.p.) significantly strengthened its position in terms of the total exports, while Indonesia and Thailand saw its share reduced by X% and X% from 2012 to 2022, respectively.

In value terms, Thailand ($X) remains the largest aluminium window and door supplier in ASEAN, comprising X% of total exports. The second position in the ranking was taken by Malaysia ($X), with an X% share of total exports. It was followed by the Philippines, with a X% share.

In Thailand, aluminium window and door exports remained relatively stable over the period from 2012-2022. In the other countries, the average annual rates were as follows: Malaysia (X% per year) and the Philippines (X% per year).

Export Prices by Country

In 2022, the export price in ASEAN amounted to $X per unit, picking up by X% against the previous year. Over the period under review, the export price, however, continues to indicate a slight shrinkage. The growth pace was the most rapid in 2019 an increase of X%. As a result, the export price attained the peak level of $X per unit. From 2020 to 2022, the export prices remained at a somewhat lower figure.

There were significant differences in the average prices amongst the major exporting countries. In 2022, amid the top suppliers, the country with the highest price was the Philippines ($X per unit), while Malaysia ($X per unit) was amongst the lowest.

From 2012 to 2022, the most notable rate of growth in terms of prices was attained by Vietnam (X%), while the other leaders experienced a decline in the export price figures.

Imports of Aluminium Doors, Thresholds For Doors And Windows

Imports in ASEAN

In 2022, supplies from abroad of aluminium doors, thresholds for doors and windows was finally on the rise to reach X units after three years of decline. Total imports indicated a strong expansion from 2012 to 2022: its volume increased at an average annual rate of X% over the last decade. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. The pace of growth was the most pronounced in 2013 when imports increased by X% against the previous year. The volume of import peaked at X units in 2016; however, from 2017 to 2022, imports remained at a lower figure.

In value terms, aluminium window and door imports soared to $X in 2022. Total imports indicated a buoyant increase from 2012 to 2022: its value increased at an average annual rate of X% over the last decade. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2022 figures, imports increased by X% against 2020 indices. The most prominent rate of growth was recorded in 2013 with an increase of X% against the previous year. The level of import peaked in 2022 and is likely to see gradual growth in the near future.

Imports by Country

Singapore represented the largest importer of aluminium doors, thresholds for doors and windows in ASEAN, with the volume of imports recording X units, which was approx. X% of total imports in 2022. Cambodia (X units) took a X% share (based on physical terms) of total imports, which put it in second place, followed by Indonesia (X%), Malaysia (X%), the Philippines (X%), Thailand (X%) and Myanmar (X%).

From 2012 to 2022, average annual rates of growth with regard to aluminium window and door imports into Singapore stood at X%. At the same time, Cambodia (X%), Myanmar (X%), Indonesia (X%), Malaysia (X%) and Thailand (X%) displayed positive paces of growth. Moreover, Cambodia emerged as the fastest-growing importer imported in ASEAN, with a CAGR of X% from 2012-2022. By contrast, the Philippines (X%) illustrated a downward trend over the same period. While the share of Cambodia (X p.p.), Indonesia (X p.p.), Myanmar (X p.p.) and Malaysia (X p.p.) increased significantly in terms of the total imports from 2012-2022, the share of Singapore (X p.p.) and the Philippines (X p.p.) displayed negative dynamics. The shares of the other countries remained relatively stable throughout the analyzed period.

In value terms, Singapore ($X) constitutes the largest market for imported aluminium doors, thresholds for doors and windows in ASEAN, comprising X% of total imports. The second position in the ranking was taken by the Philippines ($X), with a X% share of total imports. It was followed by Cambodia, with a X% share.

In Singapore, aluminium window and door imports increased at an average annual rate of X% over the period from 2012-2022. The remaining importing countries recorded the following average annual rates of imports growth: the Philippines (X% per year) and Cambodia (X% per year).

Import Prices by Country

In 2022, the import price in ASEAN amounted to $X per unit, shrinking by X% against the previous year. In general, the import price saw a relatively flat trend pattern. The most prominent rate of growth was recorded in 2019 an increase of X%. Over the period under review, import prices hit record highs at $X per unit in 2021, and then declined in the following year.

Prices varied noticeably by country of destination: amid the top importers, the country with the highest price was the Philippines ($X per unit), while Myanmar ($X per unit) was amongst the lowest.

From 2012 to 2022, the most notable rate of growth in terms of prices was attained by the Philippines (X%), while the other leaders experienced more modest paces of growth.

Source: IndexBox Platform

Frequently Asked Questions (FAQ) :